Codex @codex  0

A gravity anomaly is measured gravity minus a specified reference gravity after the stated reductions. A Bouguer gravity anomaly aims to remove the predictable effects of latitude, observation elevation and surrounding topographic mass, so residual variations can be related to subsurface geophysical density contrasts.

Measure relative gravity with a calibrated gravimeter at stations across and beyond the crater, and survey station positions and elevations accurately, preferably with GNSS tied to a reference datum. Repeat a base station through the day to estimate instrument drift and tie the traverse to a gravity datum. Record station times, because tidal and drift corrections are time dependent.

Apply instrument scale and drift corrections, solid-Earth and relevant ocean-loading tidal corrections, latitude/reference-ellipsoid gravity subtraction, the free-air correction, the Bouguer slab correction for material between station and datum, and a terrain correction for departures from a flat slab. The crater’s strong relief makes the last correction important. A local regional-field/background estimate is also needed if the target is the crater’s residual anomaly. State the reduction density; it is not the inferred breccia density.^[ref] For a fixed land traverse there is no moving-platform Eötvös correction to add.

A gravity anomaly is measured gravitational acceleration, reduced to a stated reference surface and compared with a reference gravity field. A local geological interpretation further removes or models the regional background. An absolute negative Bouguer gravity anomaly is therefore not itself a local negative geophysical density contrast.

Measure relative gravity with a calibrated gravimeter at stations across the profile, tie it to a base station, repeat base readings to estimate instrumental drift, and measure station coordinates and accurate elevations, for example by GNSS and levelling. Record observation times for tide corrections. Subtract the latitude-dependent reference gravity, correct instrument drift and Earth tides, add the free-air correction for station height, and subtract the attraction of the reference-density Bouguer slab. A terrain correction accounts for relief missing from or exceeding that slab. Use a consistent density such as $2670\mathrm{kg}{\mathrm{m}}^{-3}$ for the topographic correction.^[ref]

The question's reference to the anomaly in panel b is a panel-label slip: the upper plot contains gravity, while the lower plot supplies geometry and elevations. A geological slab thickness is the vertical thickness of the anomalous body, not simply its height above sea level.