= Heat capacity
{title2=$C_X=(\delta Q/dT)_X$}
{wiki}
Heat capacity measures the <heat> supplied per small <temperature> increase along a specified process:
$$
C_X=\left(\frac{\delta Q}{dT}\right)_X.
$$
The subscript $X$ records the constraint, such as fixed <volume (thermodynamics)> or fixed <pressure>. The units are $\mathrm{J\,K^{-1}}$. The symbol $\delta Q$ emphasizes that <heat> is a transfer along a path, rather than a <state function> with a differential $dQ$. Consequently, an unspecified <heat capacity> does not determine the required <heat>.
For a <closed system> of fixed composition undergoing a <quasistatic process>, assume that only <pressure>-<volume (thermodynamics)> <work> occurs, with no <friction> and no change in bulk <kinetic energy> or <potential energy>. The <first law of thermodynamics> and $H=U+pV$, where $U$ is <internal energy> and $H$ is <enthalpy>, then give
$$
\delta Q=dU+p\,dV=dH-V\,dp,\qquad
C_V=\left(\frac{\partial U}{\partial T}\right)_V,\qquad
C_p=\left(\frac{\partial H}{\partial T}\right)_p.
$$
These <partial derivatives> define <heat capacity at constant volume> and <heat capacity at constant pressure>, with the amount and composition also held fixed. Integrating along the selected constraint gives $Q=\int_{T_1}^{T_2}C_X(T)\,dT$ within a single <thermodynamic phase>; $Q=C_X\Delta T$ requires constant $C_X$. <Statistical Physics by David Tong/4 Classical Thermodynamics>{ref}
For a computed example, take a <monatomic gas> in the classical <ideal gas> regime, with <amount of substance> $n=1\,\mathrm{mol}$ and stipulated <molar gas constant> $R=8.314\,\mathrm{J\,mol^{-1}\,K^{-1}}$. The <equipartition theorem> gives $U=3nRT/2$, and the <ideal gas law> gives $pV=nRT$. Thus
$$
C_V=\frac32nR=12.471\,\mathrm{J\,K^{-1}},\qquad
C_p=\frac52nR=20.785\,\mathrm{J\,K^{-1}}.
$$
For the same <temperature> increase $\Delta T=10\,\mathrm K$, the two processes require
$$
Q_V=124.71\,\mathrm J,\qquad Q_p=207.85\,\mathrm J,\qquad
\Delta U_V=\Delta U_p=124.71\,\mathrm J,\qquad
W_V=0,\quad W_p=p\Delta V=nR\Delta T=83.14\,\mathrm J.
$$
Here <work> done by the <gas> is positive. At fixed <pressure>, the extra <heat> supplies expansion <work>; the <internal energy> increase is the same because <internal energy of an ideal gas> depends only on <temperature>. Their final <volume (thermodynamics)> values differ. https://openstax.org/books/university-physics-volume-2/pages/3-5-heat-capacities-of-an-ideal-gas[OpenStax, Heat capacities of an ideal gas]{ref}
\Image[/heat-capacity-constraints.png]
{title=Required <heat> depends on the constraint and the amount of material}
{description=Left: one <mole> of classical <monatomic gas> with the stipulated <molar gas constant> above; the shaded difference is expansion <work> at fixed <pressure>. Right: the illustrative fixed-<volume (thermodynamics)> body from <specific heat capacity>, with <mass> $2\,\mathrm{kg}$ and $c_V=400\,\mathrm{J\,kg^{-1}\,K^{-1}}$. Each curve starts at zero accumulated <heat>, rather than zero absolute <internal energy>.}
The practical value of <heat capacity> is that a measured <heat> input and <temperature> response can determine it. Once its constraint and <temperature> dependence are known, it predicts heating requirements and supplies <entropy> changes through <entropy from heat capacity>. <Statistical Physics by David Tong/1 The Fundamentals of Statistical Mechanics>[Tong, Statistical Physics, heat capacity as a measurable response]{ref}
Back to article page