= Kinematic viscosity
{title2=$\nu=\mu/\rho$}
The <kinematic viscosity> is <dynamic viscosity> divided by <mass density>:
$$
\nu=\frac\mu\rho,\qquad [\nu]=\mathrm{m^2\,s^{-1}}.
$$
It measures the rate at which viscous transport smooths differences in <velocity>. For constant $\mu$ and $\rho$ in <incompressible flow>, dividing the <Navier-Stokes equation> by <mass density> makes the viscous acceleration $\nu\nabla^2\mathbf u$, where $\nabla^2$ is the <Laplacian>. https://www.damtp.cam.ac.uk/user/tong/fluids/fluids.pdf[David Tong, Fluid Mechanics, section 3.1.1, p. 61]{ref}
For example, stipulate two <Newtonian fluids> with the same <dynamic viscosity> $0.10\,\mathrm{Pa\,s}$ but different <mass densities>. In the same steady <Couette flow> as above, both have <shear stress> $2.0\,\mathrm{Pa}$, but
$$
\begin{aligned}
\rho_1&=1000\,\mathrm{kg\,m^{-3}},&\nu_1&=1.0\times10^{-4}\,\mathrm{m^2\,s^{-1}},\\
\rho_2&=500\,\mathrm{kg\,m^{-3}},&\nu_2&=2.0\times10^{-4}\,\mathrm{m^2\,s^{-1}}.
\end{aligned}
$$
The same <viscous stress> transports <momentum> through less <mass> in the second fluid, so its <velocity> responds faster to a given nonuniform viscous <force>.
To see the <diffusion equation> directly, consider an unsteady parallel <velocity field> $\mathbf u=(u(y,t),0,0)$ with constant material coefficients and no streamwise <pressure gradient> or body <force>. Its <convective acceleration> vanishes, and the <Navier-Stokes equation> reduces to
$$
\partial_tu=\nu\partial_y^2u.
$$
Balancing $u/t$ against $\nu u/h^2$ gives the <viscous diffusion time> $t_\nu\sim h^2/\nu$. For the $1.0\,\mathrm{mm}$ gap, the two fluids have scales $0.010\,\mathrm s$ and $0.0050\,\mathrm s$. This is a characteristic scale, not an exact settling time. For example, a perturbation of the <Couette flow> profile satisfying zero perturbation <velocity> at both plates is
$$
\delta u(y,t)=V\sin\left(\frac{\pi y}{h}\right)
\exp\left(-\frac{\pi^2\nu t}{h^2}\right).
$$
Substituting verifies the <diffusion equation>; its amplitude falls by a factor $e$ in $h^2/(\pi^2\nu)$. <Kinematic viscosity> is therefore useful for predicting how quickly a moving wall influences the interior, while <dynamic viscosity> gives the <shear stress> at a prescribed <shear rate>.
Back to article page