= Laboratory 11: Sinusoidal Steady State Response of RC and RL Circuits by MIT OpenCourseWare
{c}
{title2=2006}
https://ocw.mit.edu/courses/6-071j-introduction-to-electronics-signals-and-measurement-spring-2006/5caae7029abb4961b6057886e691ef2c_lab11_sssr.pdf
MIT 22.071/6.071, Spring 2006, Laboratory11. Pages1–2 use square-wave excitation to identify RC decay and sinusoidal excitation plus oscilloscope observations to compare resistor/capacitor amplitudes and phases. The component values in the linked knowledge article are independently chosen.
Printed p. 1 specifies a 47 nF capacitor, a 1.5 kΩ resistor and 5 V, 1 kHz square-wave excitation for measuring the natural RC response. Page 2 compares sinusoidal capacitor/resistor amplitudes and phases with an oscilloscope. These are the published apparatus values; numerical pulse-threshold examples in the wiki use separately stated illustrative values.
Back to article page
