Solution (source code)

= Solution

For the basic <axisymmetric flow>, $\mathbf u_0=\Omega R\mathbf e_\phi$. The steady radial <Euler equation for fluid motion> gives $-\Omega^2R=-p_{0,R}/\rho$; the other components give $p_{0,z}=p_{0,\phi}=0$. Thus, in the absence of an additional body force,
$$
\boxed{p_0(R,z)=p_c+\frac12\rho\Omega^2R^2.}
$$
The additive constant is undetermined without an imposed reference <pressure>; the rigid boundary does not prescribe a uniform boundary <pressure>. Its shape is fixed by the container rather than by a free-surface <pressure> condition.

Let $v_R,v_\phi,v_z$ be the small <velocity> amplitudes and $W=p_1/\rho$ the <pressure> amplitude. Linearizing the cylindrical <Euler equations for an inviscid fluid> about uniform rotation, the material <derivative> is $\partial_t+\Omega\partial_\phi$. The intrinsic <frequency> for the stated phase convention is therefore
$$
s=\bar\sigma=\sigma+m\Omega.
$$
The radial and azimuthal curvature terms supply the <Coriolis acceleration> terms, giving
$$
isv_R-2\Omega v_\phi=-W_R,\qquad
isv_\phi+2\Omega v_R=-\frac{im}{R}W,\qquad
isv_z=-W_z.
$$
For $s\ne0,\pm2\Omega$, solving these equations gives
$$
v_R=\frac{i(sW_R+2m\Omega W/R)}{s^2-4\Omega^2},\qquad
v_\phi=-\frac{2\Omega W_R+smW/R}{s^2-4\Omega^2},\qquad
v_z=\frac{iW_z}s.
$$
The <incompressible flow> constraint is
$$
\frac1R(Rv_R)_R+\frac{im}{R}v_\phi+(v_z)_z=0.
$$
On substitution, the terms proportional to $m\Omega W_R$ cancel. The remaining equation is
$$
\frac{is}{s^2-4\Omega^2}
\left[\frac1R(RW_R)_R-\frac{m^2W}{R^2}\right]
+\frac is W_{zz}=0,
$$
which proves
$$
\boxed{\frac1R\frac{\partial}{\partial R}(R W_R)-\frac{m^2W}{R^2}
+\left(1-\frac{4\Omega^2}{\bar\sigma^2}\right)W_{zz}=0.}
$$
This is the <pressure> equation for <inertial modes in a rigid rotating sphere>. The exceptional <frequencies> used in the divisions must instead be treated in the original momentum system; they are not needed for the mode below.

A fixed rigid sphere is impermeable, so its normal <velocity> vanishes:
$$
R v_R+zv_z=0\qquad(R^2+z^2=r_0^2).
$$
Using the solved amplitudes and multiplying by $s(s^2-4\Omega^2)/i$ gives
$$
\boxed{\bar\sigma^2 R W_R+2m\Omega\bar\sigma W
+(\bar\sigma^2-4\Omega^2)zW_z=0\quad\text{on }r=r_0.}
$$
Equivalently divide by $\bar\sigma^2$ for $\bar\sigma\ne0$. Smoothness means tangential slip is allowed: there is no no-slip condition on these inviscid <normal modes>. Nor is there a condition $W=0$, since the wall supplies the required varying normal <pressure>.

For an axisymmetric oscillation, $m=0$ and $s=\sigma$. Write $\beta=1-4\Omega^2/\sigma^2$. For $W=z(AR^2+Bz^2+C)$ the radial and vertical operators are
$$
\frac1R(RW_R)_R=4Az,\qquad W_{zz}=6Bz.
$$
The interior <pressure> equation therefore requires
$$
2A+3\beta B=0.
$$
The boundary equation becomes
$$
z\left[(2+\beta)AR^2+3\beta Bz^2+\beta C\right]=0.
$$
Substituting $R^2=r_0^2-z^2$, this <polynomial> must vanish for every boundary height. Its constant and $z^2$ coefficients consequently give
$$
(2+\beta)Ar_0^2+\beta C=0,\qquad
3\beta B-(2+\beta)A=0.
$$
Together with the interior relation the latter condition is $(4+\beta)A=0$. A nontrivial nonsingular oscillatory solution needs $A\ne0$: if $A=0$ and $\beta\ne0$, the other equations force $B=C=0$. Hence $\beta=-4$, giving
$$
\boxed{\sigma^2=\frac{4\Omega^2}{5},\qquad
B=\frac A6,\qquad C=-\frac{Ar_0^2}{2}.}
$$
The <cubic axisymmetric inertial mode of a rigid sphere> is explicitly
$$
\boxed{W=A z\left(R^2+\frac{z^2}{6}-\frac{r_0^2}{2}\right),\qquad
\sigma=\pm\frac{2|\Omega|}{\sqrt5}.}
$$
Its cubic <pressure> is regular at the axis and centre, and its reconstructed <velocity> is divergence free and tangent to the sphere by the preceding identities. The <frequency> lies within the <inertial wave> band $|\sigma|<2|\Omega|$: <Coriolis acceleration>, rather than compression or a moving surface, supplies the restoring dynamics. The amplitude $A$ is arbitrary in this linear problem.