= Solution
The <inextensible fibre constraint> gives $|\mathbf x_{,1}|=1$. Write the fibre direction and its transverse unit direction as
$$
e=(\cos\theta,\sin\theta),\qquad n=(-\sin\theta,\cos\theta).
$$
Then $x_{1,1}=\cos\theta$ and $x_{2,1}=\sin\theta$. In <plane strain>, <incompressibility> gives $\det F=1$. Decomposing the second column of the <deformation gradient> along $e,n$ therefore gives $\mathbf x_{,2}=\gamma e+n$, where $\gamma=\mathbf x_{,2}\cdot e$. Hence
$$
\boxed{F=R(\theta)\begin{pmatrix}1&\gamma\\0&1\end{pmatrix}.}
$$
This is a local rotation followed by <simple shear>.
The compatibility of the <deformation map> requires $\mathbf x_{,12}=\mathbf x_{,21}$. Since $e_{,j}=\theta_{,j}n$ and $n_{,j}=-\theta_{,j}e$, this is
$$
\theta_{,2}n=(\gamma_{,1}-\theta_{,1})e+\gamma\theta_{,1}n.
$$
Taking components gives the compatibility relations for <incompressible inextensible-fibre plane strain>:
$$
\boxed{\gamma_{,1}=\theta_{,1},\qquad\theta_{,2}=\gamma\theta_{,1},\qquad\gamma=\theta+f(X_2).}
$$
Along a reference curve,
$$
\frac{d\theta}{ds}=\theta_{,1}\left(\frac{dX_1}{ds}+\gamma\frac{dX_2}{ds}\right).
$$
Thus $\theta$ is constant when $dX_2/dX_1=-1/\gamma$. The equivalent condition $dX_1+\gamma\,dX_2=0$ also covers $\gamma=0$. Its current tangent is proportional to $F(-\gamma,1)^T=n$, so these transverse curves are straight wherever the deformation is regular.
To construct the stress with zero <body force>, specify the local <shear stress> $h$ as the material's function or functional of $\gamma$ under <simple shear>. The normal stresses are constraint reactions: <incompressibility> supplies pressure, and the <inextensible fibre constraint> supplies fibre tension. Write
$$
\sigma=s\,e\otimes e+h(e\otimes n+n\otimes e)+t\,n\otimes n.
$$
The compatible geometry has $\nabla\theta=\kappa e$ with $\kappa=\theta_{,1}$, so $\nabla\cdot e=0$, $\nabla\cdot n=-\kappa$, $(e\cdot\nabla)e=\kappa n$ and $(n\cdot\nabla)e=0$. Resolving $\nabla\cdot\sigma=0$ along the two directions gives
$$
e\cdot\nabla s=2\kappa h-n\cdot\nabla h,\qquad n\cdot\nabla t-\kappa t=-e\cdot\nabla h-\kappa s.
$$
The <triangular equilibrium construction for inextensible-fibre plane strain> now determines $s$ by integration along fibres and then $t$ along transverse curves. Thus any regular compatible deformation has a local zero-body-force stress construction once the shear law and suitable boundary integration data are supplied. There is no additional constitutive normal-stress law to specify: the two normal components are fixed by <force balance> and boundary <tractions>. This does not assert that arbitrary separately prescribed boundary tractions can accompany an arbitrary deformation.
Back to article page