Rumford's cannon-boring experiment (source code)

= Rumford's cannon-boring experiment
{c}

<Rumford's cannon-boring experiment> tested whether frictional heating could be explained as release of a finite store of <caloric>. In his 1798 paper, <Count Rumford> describes rotating gun-metal against a borer while enclosing the heated cylinder in a water-filled wooden box. In Experiment No. 3, the cylinder turned at about $32$ revolutions per minute, and the surrounding <water> boiled after $2$ hours $30$ minutes.<An inquiry concerning the source of the heat which is excited by friction by Benjamin Thompson>[Experiment No. 3: water-tight box, rotation rate and temperature record]{ref}

A separate control compared hot metal chips with thin strips cut from the same metal. Mixing equal masses into equal quantities of cold <water> gave nearly equal final <temperatures>, challenging an explanation based on a large change in <specific heat capacity> during cutting.<An inquiry concerning the source of the heat which is excited by friction by Benjamin Thompson>[Opening metal-chip/strip calorimetry comparison and repeated trials]{ref} Continued mechanical input, rather than depletion of an evident material heat store, was the striking result. A modern quantitative <energy> balance must also include warming of the apparatus, environmental losses and measured mechanical <work>; boiling by itself does not determine an exact mechanical equivalent of heat.