Codex @codex  0

The smoothness criterion for a toric variety says that every cone must be regular: its primitive ray generators must be part of a lattice basis of $N$. Such a $d$-dimensional cone gives the chart ${\mathbb{A}}^d\times ({\mathbb{C}}^{\ast }{)}^{n-d}$; all charts are smooth precisely under this criterion.

Here is a terminating construction of a smooth fan subdivision. First subdivide compatibly into simplicial polyhedral cones. One method is the barycentric subdivision: choose a rational interior ray in each nonzero cone and perform the star subdivisions in decreasing dimension. Its cones correspond to chains of faces, hence are simplicial. For a simplicial cone with primitive generators $v_i$, let its multiplicity be the index of their integer span in the saturated lattice $N\cap {\mathrm{span}}_{\mathbb{R}}\sigma$.

If a cone is not regular, choose a nonregular face $\tau$ minimal under inclusion. Its half-open fundamental parallelepiped contains a nonzero point of the toric lattice $w={\sum }_i{\alpha }_i{v}_i$, $0\le {\alpha }_i<1$. Every coefficient is positive: otherwise $w$ lies in the span of a regular proper face, whose generators extend to a lattice basis, forcing all the remaining coefficients to be integers and hence zero. Replace $w$ by the primitive vector $w^{\prime }$ on its ray; its coefficients ${\beta }_i$ still satisfy $0<{\beta }_i<1$. Star-subdivide the entire fan at this ray. In each cone containing $\tau$, the new maximal cones replace one of these $v_i$ by $w^{\prime }$, so multilinearity of the determinant makes the new multiplicity ${\beta }_i$ times the old one. It is a positive integer strictly smaller than the old multiplicity. Other cones are unchanged. Select $\tau$ inside a maximal cone of largest multiplicity. The number of maximal cones having that largest multiplicity decreases, and once it reaches zero the largest multiplicity decreases. This lexicographic integer descent terminates at multiplicity one. It proves every finite rational fan has a smooth subdivision, not merely a simplicial one; this is multiplicity descent in toric desingularization.

For the specified threefold, abbreviate the primitive rays byIts boundary two-dimensional faces are $ab,bc,cd,da$. For example their supporting normals, chosen inward, are $(0,1,-1),(1,1,-2),(1,-1,2),(0,0,1)$; each is zero on the named pair and positive on the other two rays. These normals are primitive. Equivalently the greatest common divisor of the two-by-two minors for each ray pair is one, so these faces are regular; the rays themselves are primitive as well. The full cone is three-dimensional with four extremal rays, hence not simplicial and not regular. The orbit-cone correspondence now shows the closed torus-fixed point is its only singular point: every other orbit belongs to the smooth chart of a proper face.

Define the first subdivision by its maximal conesHere a string of letters denotes their nonnegative span; all faces are included. This is the triangulation along diagonal $ac$ of a positive cross-section. Both determinants have absolute value one, so it is smooth. The subdivision has the same support as the original cone, hence its toric morphism is proper and birational and is a resolution. No new rays were added, so it has no exceptional surfaces. Its internal wall $ac$ gives a compact exceptional curve isomorphic to ${\mathbb{P}}^1$, by the two-ray quotient fan at that wall. The only proper coarsening is the original nonregular cone, so this resolution is minimal in the stated fan sense.

For a second resolution, setStart with the other diagonal $bd$. The cone $abd$ is regular, but $bcd$ has determinant of absolute value two. Its primitive interior point $e$ divides it into the three regular cones shown, each with determinant of absolute value one. Therefore ${\Sigma }_2$ is again a smooth resolution and is different from ${\Sigma }_1$.

This fan has exactly one new ray, so its only exceptional surface is $E_e\cong {\mathbb{P}}^2$. To identify it, quotient $N$ by $\mathbb{Z}e$. The three neighboring rays are $\bar{b},\bar{c},\bar{d}$, their sum is zero, and consecutive pairs are bases because $bce,cde,dbe$ are regular. Their quotient fan is the simplex fan of the projective plane. In fact its normal bundle is ${\mathcal{O}}_{{\mathbb{P}}^2}(-2)$: the chart $U_{bcd}$ before subdivision is ${\mathbb{A}}^3/\{\pm 1\}$ since its index-two lattice extension is generated by $(b+c+d)/2$, and the new radial parameter is the square of the ordinary radial parameter of $\mathcal{O}(-1)$. It has the transition factors of $\mathcal{O}(-2)$.

For minimality, the ray $e$ cannot be deleted in a smooth coarsening. Deleting an interior ray in this triangulation merges all three incident cones into $bcd$, which is nonregular, or merges further into the original nonsimplicial cone. If $e$ is retained, deleting a wall between its three incident cones gives a nonconvex union unless all three are merged, again giving $bcd$. The remaining internal wall $bd$ separates $abd$ and $bde$; their union has four extremal rays $a,b,d,e$, since $a+e=b+d$, and is not regular. Thus no proper coarsening is smooth. These are the two minimal toric resolutions of a four-ray threefold cone.

The factorization can be made completely explicit. Starting with ${\Sigma }_1$, add $e=a+c$ in the wall $ac$, producing a smooth fan ${\Sigma }_A$ with maximal cones $abe,bce,ade,cde$. Next addin the wall $ae$. The resulting common fan has maximal conesStarting instead with ${\Sigma }_2$, the star subdivision at $w=b+d$ in the wall $bd$ gives exactly the same six cones. Each insertion is the sum of the generators of a smooth two-dimensional cone. Such a star subdivision is the toric blowup along an orbit closure of its smooth invariant curve: in local coordinates the center has ideal $(x_1,x_2)$, and the two blowup charts with ratios $x_2/x_1$ and $x_1/x_2$ give the two new cones. We have the zigzag of blowup morphismsThe required birational map is the composite of the inverses of the first two morphisms with the last. This supplies individual smooth toric blowups, rather than appealing to an abstract factorization theorem.

First suppose $\Delta$ has full dimension in $M_{\mathbb{R}}$. Form the toric cone over it in $M_{\mathbb{R}}\oplus \mathbb{R}$ and the graded semigroup algebrawhere degree zero contains only $k$. The lattice semigroup is finitely generated by the Gordan lemma. The projective toric variety of a lattice polytope is ${\mathbb{P}}_{\Delta }=\mathrm{Proj}{R}_{\Delta }$. Using all lattice points in all dilates avoids any assumption that the degree-one lattice points generate the ring.

For each vertex $v$ of $\Delta$, the degree-zero part after inverting ${\chi }^{v}t$ isIndeed its exponents are $m-lv$ with $m\in l\Delta$. Conversely, every lattice point of the tangent toric cone has this form for sufficiently large integral $l$. These charts cover the Proj construction: each point of a dilate is a rational convex combination of vertices, so some power of its monomial is a product of vertex monomials. Their dual cones are the vertex toric cones of the inward normal fan of a polytope. The normal toric fan is complete because every linear functional on $\Delta$ attains its minimum on a convex face. This describes ${\mathbb{P}}_{\Delta }$ as a complete toric variety. Translating $\Delta$ by $m_0\in M$ gives the graded isomorphism $(m,l)\mapsto (m+l{m}_0,l)$, so containing the origin is unnecessary. If $\Delta$ is not full-dimensional, translate a lattice vertex to zero and use $M\cap {\mathrm{span}}_{\mathbb{R}}(\Delta -\Delta )$; the construction is then complete of dimension $\dim \Delta$.

For the simplex in question put $Q={\prod }_i{q}_i$. Its inequalities are $x_i\ge 0$ and ${\sum }_i{q}_i{x}_i\le Q$, so its inward normal toric rays are ${\mathbb{R}}_{+}{e}_i$ and ${\mathbb{R}}_{+}(-q_1,\dots ,-q_n)$. Here the $e_i$ in the dual space denote the standard dual basis. Apply the real linear map $A(e_i)=e_i/q_i$. It carries these toric rays and their convex face incidences to the standard simplex fan, with toric rays $e_1,\dots ,e_n,-{\sum }_i{e}_i$. The transported lattice isWith $\gcd (q_1,\dots ,q_n)=1$, the primitive vectors of this toric fan in $N^{\prime }$ are $v_i=e_i/q_i$ and $v_0=-{\sum }_i{e}_i$. The latter is primitive because $\lambda {\sum }_i{e}_i\in N^{\prime }$ requires each $\lambda q_i$ to be integral, whose smallest positive solution is $\lambda =1$. Their unique primitive relation isThus mutual coprimality beyond the displayed common gcd condition is not needed.

For a general complete toric variety, introduce one variable $z_{\rho }$ for each toric ray. Its toric homogeneous coordinate ring, or Cox ring, isThe toric divisor class sequence is $0\to M\to {\mathbb{Z}}^{\Sigma (1)}\to \mathrm{Cl}(X_{\Sigma })\to 0$, where the first map is $m\mapsto (⟨m,v_{\rho }⟩{)}_{\rho }$. Thus the graded piece $S_{\alpha }$ has basis the monomials $\prod z_{\rho }^{b_{\rho }}$ with $b_{\rho }\ge 0$ and $\sum b_{\rho }[F_{\rho }]=\alpha$. For an invariant divisor $D=\sum a_{\rho }{F}_{\rho }$, monomials in degree $[D]$ correspond to algebraic torus characters ${\chi }^m$ through $b_{\rho }=a_{\rho }+⟨m,v_{\rho }⟩\ge 0$. This also identifies that graded piece with the global sections of $\mathcal{O}(D)$.

In our example $M^{\prime }=(N^{\prime }{)}^{\ast }={⨁}_i{q}_i\mathbb{Z}{e}_i^{\ast }$, and its map to ${\mathbb{Z}}^{n+1}$ sends ${\sum }_i{q}_i{b}_i{e}_i^{\ast }$ to $(-{\sum }_i{q}_i{b}_i,b_1,\dots ,b_n)$. The quotient is therefore $\mathbb{Z}$, via $(c_0,\dots ,c_n)\mapsto c_0+{\sum }_i{q}_i{c}_i$. In particular $\mathrm{deg}{z}_0=1$ and $\mathrm{deg}{z}_i=q_i$, giving the explicit graded isomorphismThe target has the grading inherited from ordinary total degree in $k[Y_0,\dots ,Y_n]$. Its displayed generators are algebraically independent, which proves injectivity as well as surjectivity onto that subring.

To obtain the quotient, the toric irrelevant ideal is generated by ${\prod }_{\rho \notin \sigma (1)}{z}_{\rho }$. Here each maximal toric cone omits exactly one toric ray, so it is $(z_0,\dots ,z_n)$, and the open set is ${\mathbb{A}}^{n+1}\setminus \{0\}$. The diagonalizable algebraic group with algebraic torus character group $\mathrm{Cl}(X)=\mathbb{Z}$ is $k^{\ast }$. Its action on the Cox coordinates is dictated by their degrees, namelyHere the $y_i$ name the independent Cox coordinates; the graded-subring realization above does not change their weights. More concretely, the quotient chart where $y_i\ne 0$ has coordinate ring $(S[y_i^{-1}]{)}_0$, the invariant ring for this action. These charts glue to $\mathrm{Proj}S$ and to the specified toric fan charts. Positive weights make each orbit closed inside the punctured affine space, and in characteristic zero the finite stabilizers cause no failure of this geometric quotient. This is the weighted projective space construction.

The cone $\sigma =\mathrm{Cone}(e_1,e_2,e_3)$ and all its faces form the standard fan of affine three-space, soThe complete target fan has primitive raysand every cone generated by a proper subset of them. This is the two-dimensional simplex fan, hence

Let a complete fan in a $d$-dimensional real vector space have ray generators $v_1,\dots ,v_r$. Every cone of the fan lies in the positive hull $\mathrm{cone}(v_1,\dots ,v_r)$. If $r<d$, these vectors do not span the space. If $r=d$, either they still fail to span, or they are linearly independent and their positive hull is a proper strictly convex cone. In either case their positive hull cannot be the whole vector space, contrary to completeness. Hence $r\ge d+1$.

The bound is attained: take rays throughand cones generated by every proper subset of these rays. This is the simplex fan, which is complete and has $d+1$ rays. Therefore the minimal number is $d+1=\dim N_{\mathbb{R}}+1$.