 4:2:2 chroma subsampling

4:2:2 chroma subsampling keeps the full luma sample count while sampling each colour-difference component at half the horizontal rate and the full vertical rate. Thus a horizontal group with four Y samples has two Cb and two Cr samples.^[ref]

For an original sample-count example, let the grid be six positions wide and three rows high. It contains 18 Y samples and nine samples of each colour-difference component. At eight bits per sample, its active payload isThe corresponding 4:4:4 chroma sampling payload is 54 bytes. The reduction is one third, or from 24 to 16 bits per original pixel. These counts omit padding and any alpha channel; they describe a sampling grid rather than every storage API's alignment constraints.

Horizontal fine colour detail can be lost even though the vertical sample count is unchanged. If a colour-difference row alternates between codes 40 and 160 at every luma position, pair averaging gives three samples of 100 on the stipulated six-position row. Interpolating from those averages cannot identify the original alternation. A low-pass filter and an explicit chroma sample location describe how the reduction is performed; the ratio alone does not specify either.

For a grid whose colour samples share the luma row coordinates, chroma reconstruction needs to estimate missing horizontal positions without inventing a missing vertical row. A later conversion to 4:2:0 chroma subsampling additionally reduces the colour sampling vertically. Rearranging the same 4:2:2 samples between packed pixel formats and planar pixel formats changes layout without making that further sampling reduction.