 Bearing axial travel interval

A bearing axial travel interval states the range of relative shaft/housing positions that must be accommodated, or the range physically available, using an explicit axial reference. It is more informative than one unsigned clearance number when heating, cooling and assembly offsets move the shaft in different directions. A non-locating bearing support accommodates such movement while a locating bearing determines the reference position.^[ref]

Suppose thermal operating states give displacement $d\in [-0.12,0.18]\mathrm{mm}$ and an independent assembly offset lies in $[-0.05,0.05]\mathrm{mm}$. Adding the endpoint bounds gives required displacement $d\in [-0.17,0.23]\mathrm{mm}$. This is a bound over the permitted combinations, not a standard deviation.

Let available physical travel be $[a,b]$ and choose bearing nominal axial setting $x_0$. Requiring every displacement in $[d_{\min },d_{\max }]$ to remain within the travel givesorIf physical travel is $[-0.20,0.20]\mathrm{mm}$ for the preceding displacement range, both endpoints force $x_0=-0.03\mathrm{mm}$. Setting $x_0=0$ would exceed the positive limit by0.03mm despite equal total required and available spans.

The example has no spare endpoint margin: requiring an additional positive margin at both ends makes the nominal-setting interval empty. Correlated thermal inputs can also make a naive independent-range bound conservative; a tighter result requires the permitted joint operating states. The interval must refer to the actual movement mechanism, because reaching its end can introduce a bearing thermal end-stop load.