Connect two computers directly without a router with an Ethernet cable Updated 2025-07-16
For IP-level communication, askubuntu.com/questions/22835/how-to-network-two-ubuntu-computers-using-ethernet-without-a-router/116680#116680 just worked between P51 and P14s both on Ubuntu 23.10 connected with a regular Cat 5e cable.
On both machines, first we found the Ethernet cable interface name with the which outputs on the P41s:so the interface was
ip CLI tool:ip a1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp1s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether fc:5c:ee:24:fb:b4 brd ff:ff:ff:ff:ff:ff
3: wlp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 04:7b:cb:cc:1b:10 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.123/24 brd 192.168.1.255 scope global dynamic noprefixroute wlp2s0
valid_lft 61284sec preferred_lft 61284sec
inet6 fe80::3597:15d8:74ff:e112/64 scope link noprefixroute
valid_lft forever preferred_lft foreverenp1s0f0, because wlp is wireless and lo is localhost.So on the P14s we assign an IP of 10.0.0.10 to the P51:
sudo ip address add 10.0.0.10/24 dev enp1s0f0Then on the P51 analogously, giving IP of 10.0.0.20 to the P14s:
sudo ip address add 10.0.0.20/24 dev enp0s31f6And after that, P14s can:and P51 can:
ping 10.0.0.10ping 10.0.0.20 Connect to other computer in LAN by hostname with DHCP Updated 2025-07-16
TODO didn't manage to get it working with TP Link ARCHER VR2800 even though it shows DHCP as enabled and it also shows MAC addresses and corresponding hostnames in the router management interface.
Connect to other computer in LAN by hostname Updated 2025-07-16
Wireshark Updated 2025-07-16
Amazing tool that captures packets and disassembles them. Allows you to click an interactive tree that represents Ethernet, TCP/IP and application layer like HTTP.
Start capture immediately from CLI, capture packets to/from 192.168.1.102:
sudo wireshark -f 'host 192.168.1.102' -k tcpdump Updated 2025-07-16
To test it, let's get two computers on the same local area network, e.g. connected to Wi-Fi on the same home modem router.
On computer B:
- find computer IP with the
ipCLI tool. Suppose it is 192.168.1.102 - then run Ciro's
ncHTTP test server
Output on terminal 1:TODO understand them all! Possibly correlate with Wireshark, or use
17:14:22.017001 IP ciro-p14s.55798 > 192.168.1.102.8000: Flags [S], seq 2563867413, win 64240, options [mss 1460,sackOK,TS val 303966323 ecr 0,nop,wscale 7], length 0
17:14:22.073957 IP 192.168.1.102.8000 > ciro-p14s.55798: Flags [S.], seq 1371418143, ack 2563867414, win 65160, options [mss 1460,sackOK,TS val 171832817 ecr 303966323,nop,wscale 7], length 0
17:14:22.074002 IP ciro-p14s.55798 > 192.168.1.102.8000: Flags [.], ack 1, win 502, options [nop,nop,TS val 303966380 ecr 171832817], length 0
17:14:22.074195 IP ciro-p14s.55798 > 192.168.1.102.8000: Flags [P.], seq 1:82, ack 1, win 502, options [nop,nop,TS val 303966380 ecr 171832817], length 81
17:14:22.076710 IP 192.168.1.102.8000 > ciro-p14s.55798: Flags [P.], seq 1:80, ack 1, win 510, options [nop,nop,TS val 171832821 ecr 303966380], length 79
17:14:22.076710 IP 192.168.1.102.8000 > ciro-p14s.55798: Flags [.], ack 82, win 510, options [nop,nop,TS val 171832821 ecr 303966380], length 0
17:14:22.076727 IP ciro-p14s.55798 > 192.168.1.102.8000: Flags [.], ack 80, win 502, options [nop,nop,TS val 303966383 ecr 171832821], length 0
17:14:22.077006 IP ciro-p14s.55798 > 192.168.1.102.8000: Flags [F.], seq 82, ack 80, win 502, options [nop,nop,TS val 303966383 ecr 171832821], length 0
17:14:22.077564 IP 192.168.1.102.8000 > ciro-p14s.55798: Flags [F.], seq 80, ack 82, win 510, options [nop,nop,TS val 171832821 ecr 303966380], length 0
17:14:22.077578 IP ciro-p14s.55798 > 192.168.1.102.8000: Flags [.], ack 81, win 502, options [nop,nop,TS val 303966384 ecr 171832821], length 0
17:14:22.079429 IP 192.168.1.102.8000 > ciro-p14s.55798: Flags [.], ack 83, win 510, options [nop,nop,TS val 171832824 ecr 303966383], length 0-A option to dump content. iproute2 Updated 2025-07-16
Local area network Updated 2025-07-16
Double quotes Updated 2025-07-16
At sign Updated 2025-07-16
Andrew Wiles Updated 2026-01-30
Computer network by scale Updated 2025-07-16
Linux networking HOWTO Updated 2025-07-16
Punctuation Updated 2025-07-16
Typeface Updated 2025-07-16
Censorship of pornography Updated 2025-07-16
What is more obscene: sex or war? scene from The People vs. Larry Flynt
. Source. 1996 ASCII typeface Updated 2025-07-16
Tis term was invented by Ciro Santilli, it refers to ASCII art of text, essentially creating a typeface. in that medium..
Proton VPN Updated 2025-07-16
3D rigid body dynamics benchmark Updated 2025-07-16
Virtual private network Updated 2025-07-16
riscv/timer.S Updated 2025-07-16
TODO: the interrupt is firing only once:
Adapted from: danielmangum.com/posts/risc-v-bytes-timer-interrupts/
Tested on Ubuntu 23.10:Then on shell 1:and on shell 2:GDB should break infinitel many times on
sudo apt install binutils-riscv64-unknown-elf qemu-system-misc gdb-multiarch
cd riscv
makeqemu-system-riscv64 -machine virt -cpu rv64 -smp 1 -s -S -nographic -bios none -kernel timer.elfgdb-multiarch timer.elf -nh -ex "target remote :1234" -ex 'display /i $pc' -ex 'break *mtrap' -ex 'display *0x2004000' -ex 'display *0x200BFF8'mtrap as interrupts happen. There are unlisted articles, also show them or only show them.