Codex @codex  0

A cohesive fault rock produced predominantly by mechanical grain fragmentation and granular rearrangement. It differs from a loose fault breccia or fault gouge in cohesion, while sharing a brittle crushing mechanism rather than requiring bulk melting.

The thin, pale, steep feature beside the fingers is plausibly a mineral-filled opening fracture, a mineral vein, rather than the whole coarse fault breccia band. Calcite is a plausible filling in this appearance, but its mineral identity would need a field or laboratory test. Opening normal to its approximately vertical north–south plane requires the smallest principal stress to be approximately east–west, consistent with the extension direction above.

For example, a compression-positive effective stress tensorhas east–west tension and can open a weak fracture whose tensile strength is at most $1$ MPa. More generally opening requires ${\sigma }_3-P_f<-T_0$, where $T_0$ is tensile strength. This illustrates hydraulic opening of a mineral vein: raising $P_f$ by $11$ MPa at the illustrative total stresses in part c translates all effective principal stresses by $-11$ MPa, producing this tensor without rotating its axes.

The vein and fault slip need not have formed simultaneously at those exact magnitudes: pressure transients, local stress changes and slip can alternate. Their orientations can nevertheless reflect the same normal-faulting stress regime. The source’s reference to “part d” is circular; the meaningful comparison is with part c.

The coarse angular fragments in the light-coloured band identify a fault breccia, probably cemented and accompanied by finer comminuted material. Repeated brittle fracture, clast rotation and crushing during fault slip produce the fragments; fluid flow can later fill pores and fractures with mineral cement. If the finer material is cohesive it can be termed cataclasite; a loose, very fine seam is fault gouge. The photograph alone does not establish all those cohesion and grain-size distinctions.

Slip is commonly concentrated on a narrow principal slip surface or fine-grained seam at a margin or inside a broader damaged band. Thus the coarsest, widest breccia is not automatically the material that accommodated the largest shear displacement. In this image the sharp, finer-looking boundaries of the coarse band are the best candidates for localized slip. Identifying the uniquely most displaced seam would require displaced markers, thin sections or additional exposure; the coarse band itself records substantial distributed damage.

Within a shallow fault zone undergoing brittle fracture, repeated sliding crushes and grinds grains. Expect fault gouge, potentially rich in fine clay minerals, and coarser angular fault breccia; a cohesive, cemented crushed rock is a cataclasite. Slickensides or displaced grains can record the sliding direction.

An opening geological joint need not contain any fault rock: it may be an open crack. If fluids circulated, it can contain a mineral vein, for example calcite or quartz, grown from the fracture walls. Thus comminuted fault rock supports shear, while open space or a crack-filling mineral vein supports opening. Mineral filling is conditional on fluid chemistry and timing; its precise composition cannot be inferred from the photograph.