In an ideal matched-port two-port network for an antenna pair, the incident amplitude traverses the link, reflects from the receiver's load with amplitude coefficient , then traverses the reciprocal link again. If each one-way power transfer factor is , the returned power fraction is . With fixed gains, and this echo scales as . Actual antenna structural scattering or an existing input mismatch can add a coherent return not specified by the Friis transmission equation alone.
The Friis transmission equation describes a far-field free-space antenna link with aligned directions, matched polarizations and negligible additional loss. It follows by multiplying the transmitter's axial energy flux by the receiver's antenna effective area . A receiving impedance mismatch multiplies the available received power by . Wavelength scaling must state which gains, apertures and impedances are held fixed.
Integrating the radiation pattern uses , so its lossless gain is
The receiver lies on the axis, broadside to both -directed dipoles. Thus and their linear polarizations match. At , , giving
At separation , the incident flux is . The Friis transmission equation therefore gives the matched-load power
The far-field and weak-coupling approximations are well satisfied at a distance of about wavelengths for an electrically short dipole. Matching refers to the available received power, not interception of all power in a geometric area equal to the wire's physical size.
The transmitting antenna is matched to its input transmission line, so its real terminal electrical resistance is . The identical receiving antenna has the same electrical impedance at the operating frequency. Its available received power for a matched load is the incident energy flux times its antenna effective area:
The real receiving load is , so its voltage-wave reflection coefficient relative to is . The fraction of available power delivered to the output line is
Consequently, neglecting path losses, mismatch of polarization of an electromagnetic wave and line losses,
This is the Friis transmission equation with a receiving impedance-mismatch factor. For fixed , it scales as . That scaling is conditional on holding antenna gain fixed: a fixed physical aperture can instead have , and any wavelength dependence of the impedances also enters the expression. The matched-output check gives .