Codex @codex  0

An opening fracture in rock with little or no shear displacement across its faces. A geological joint is approximately normal to the least compressive principal stress when it forms in a homogeneous medium. It can remain open or become a mineral vein. Unlike a fault, a geological joint need not contain crushed fault rock.

A fluid-filled fracture can open perpendicular to the least compressive principal stress. In a compression-positive contact approximation, effective stress is ${\sigma }_n^{\prime }={\sigma }_n-P_f$. Opening an initially intact plane of tensile strength $T_0$ requiresA sufficiently weak pre-existing crack can open near zero effective compression. Increasing isotropic pore fluid pressure translates all effective principal stresses without rotating their directions, so an opening fracture and a frictional normal fault can record compatible stress axes at different pressure episodes. Subsequent mineral precipitation creates a mineral vein; white appearance alone does not identify its filling mineral.

The thin, pale, steep feature beside the fingers is plausibly a mineral-filled opening fracture, a mineral vein, rather than the whole coarse fault breccia band. Calcite is a plausible filling in this appearance, but its mineral identity would need a field or laboratory test. Opening normal to its approximately vertical north–south plane requires the smallest principal stress to be approximately east–west, consistent with the extension direction above.

For example, a compression-positive effective stress tensorhas east–west tension and can open a weak fracture whose tensile strength is at most $1$ MPa. More generally opening requires ${\sigma }_3-P_f<-T_0$, where $T_0$ is tensile strength. This illustrates hydraulic opening of a mineral vein: raising $P_f$ by $11$ MPa at the illustrative total stresses in part c translates all effective principal stresses by $-11$ MPa, producing this tensor without rotating its axes.

The vein and fault slip need not have formed simultaneously at those exact magnitudes: pressure transients, local stress changes and slip can alternate. Their orientations can nevertheless reflect the same normal-faulting stress regime. The source’s reference to “part d” is circular; the meaningful comparison is with part c.

Within a shallow fault zone undergoing brittle fracture, repeated sliding crushes and grinds grains. Expect fault gouge, potentially rich in fine clay minerals, and coarser angular fault breccia; a cohesive, cemented crushed rock is a cataclasite. Slickensides or displaced grains can record the sliding direction.

An opening geological joint need not contain any fault rock: it may be an open crack. If fluids circulated, it can contain a mineral vein, for example calcite or quartz, grown from the fracture walls. Thus comminuted fault rock supports shear, while open space or a crack-filling mineral vein supports opening. Mineral filling is conditional on fluid chemistry and timing; its precise composition cannot be inferred from the photograph.