= Ohm's law
{c}
{title2=$V=IR$}
{wiki}
<Ohm's law> states that an <Ohmic conductor> has <electric current> proportional to its applied <electric potential difference>, with constant <electrical resistance> under fixed material conditions:
$$
V=IR,\qquad I=\frac VR.
$$
Here $V=\phi(A)-\phi(B)$ is the terminal <electric potential difference>, and positive $I$ enters at $A$ and exits at $B$. This sign convention makes $VI$ the electrical <power> absorbed. The straight-line relation through the origin lets one constant predict the response at many applied <electric potential differences>. Merely defining $R=V/I$ at one nonzero operating point does not establish <Ohm's law>: a component may have a ratio that varies with applied <electric potential difference>. Material and <temperature> must be specified and held fixed; many components have a nonlinear response. https://openstax.org/books/university-physics-volume-2/pages/9-4-ohms-law[Ling, Sanny and Moebs, §9.4: Ohmic and non-Ohmic responses]{ref}.
For the ideal <resistor> model $R=2\,\Omega$ at <electric potential difference> $V=5\,\mathrm V$,
$$
I=\frac{5\,\mathrm V}{2\,\Omega}=2.5\,\mathrm A,\qquad P=VI=I^2R=\frac{V^2}{R}=12.5\,\mathrm W.
$$
This <power> is converted to <internal energy> by <Joule heating>; a <watt> is a <joule> per second. If the model holds for <time> $10\,\mathrm s$, the transferred <energy> is $125\,\mathrm J$. Doubling <electric potential difference> doubles <electric current> and quadruples <power> for the same fixed $R$. The model keeps material <temperature> fixed even while calculating <Joule heating>; appreciable changes in <temperature> may require a changing <electrical resistance>. <University Physics Volume 2 by Samuel J. Ling and others/9.5 Electrical Energy and Power>[Ling, Sanny and Moebs, §9.5: electrical power and heating]{ref}.
\Image[/ohmic-wire-voltage-and-current.png]
{title=<Ohm's law> gives linear <electric current> and quadratic <Joule heating> <power> at fixed <electrical resistance>}
{description=The ideal model holds $R=2\,\Omega$ fixed. At $V=5\,\mathrm V$, the marked values are $I=2.5\,\mathrm A$ and $P=12.5\,\mathrm W$.}
{source=ohmic-wire-voltage-and-current.py}
In 1827, <Georg Ohm> published his mathematical account of electrical transport in \i[Die galvanische Kette, mathematisch bearbeitet]. On printed page 36, his relation $S=A/L$ expresses <electric current> in terms of total driving tension and a reduced <length> incorporating <electrical conductivity> and geometry. This is historical notation: his $A$ is not the <wire cross-sectional area> used here, and his $L$ is not simply the wire's physical <length>. The striking idea is that material response and geometry can be combined into one quantity governing an <electrical circuit>. https://archive.org/details/diegalvanischek00ohmgoog[Ohm, Die galvanische Kette, mathematisch bearbeitet (1827), p. 36, original edition]{ref}.
Back to article page