Michael Romalis 2026-11-05
Michael Romalis develops optical magnetometry, in which resonant light prepares or reads an atomic vapour's response to a magnetic field. His review with Dmitry Budker explains how atomic spin dynamics can provide sensitive magnetic sensing.[ref]
Optical Magnetometry by Dmitry Budker and Michael Romalis. Abstract and operating principles of atomic-vapour magnetometers
The atoms supply the field-sensitive reference, and changes of transmitted or emitted light provide the readout. The approach connects atomic physics with measurements of weak biological or geophysical magnetic fields, rather than requiring a conducting pickup coil for every measurement.
Optical magnetometry 2026-11-05
Optical magnetometry infers a magnetic field from the response of optically prepared and observed atomic spins. In a typical vapor-cell apparatus, resonant pump light polarizes alkali atoms; a field makes that polarization precess at a Larmor frequency . Probe-light absorption or rotation converts the spin evolution into an optical signal.[ref]
Optical Magnetometry by Dmitry Budker and Michael Romalis. Principles of optical magnetometry and atomic-vapor implementations
A motivating experiment uses a sealed vapor cell, pump and probe beams, photodetection, magnetic shielding and coils producing a known test field. Applying an oscillating field and sweeping its frequency reveals a resonance near . Its shift when the coil current changes calibrates the field response, while its width reflects spin relaxation. If a sensor has a calibrated gyromagnetic ratio , a 70 Hz resonance corresponds to 10 nT in this simple model. This numerical example illustrates conversion of frequency to field; actual calibration must control light shifts, field gradients and relaxation. Optical readout detects the spin response, not a direct image of the magnetic field.