A "sanity check" is a basic test or evaluation that is performed to quickly assess whether a concept, process, or system is functioning as expected or leads to reasonable conclusions. The purpose of a sanity check is to ensure that the results or outputs are credible and make sense before proceeding with more extensive analysis or a complex decision-making process.
Selective Repeat Automatic Repeat reQuest (SR-ARQ) is a specific error control protocol used in data communication to ensure reliable delivery of packets over a network. It is an extension of the Automatic Repeat reQuest (ARQ) protocol and is designed to improve efficiency in scenarios where packets can be received out of order or lost during transmission.
Sequential decoding is a technique used in communication systems and information theory for decoding sequences of data encoded for transmission. This method is particularly relevant in the context of error-correcting codes and various coding schemes, such as convolutional codes. ### Key Features of Sequential Decoding: 1. **Step-by-Step Decoding**: Sequential decoding operates on a sequence of received symbols, using previously decoded symbols to inform the decoding of subsequent ones.
Serial concatenated convolutional codes (SCCC) are a type of error correction coding scheme that combines two or more convolutional codes to improve the reliability of data transmission over noisy channels. The method involves encoding the data with one convolutional code, passing the output through another convolutional code, and then transmitting the resulting encoded signal. ### Key Concepts 1.
Shaping codes, also known as shaping techniques or shaping strategies, refer to methods used in coding theory, particularly in the context of communications and data transmission. These techniques are utilized to enhance the efficiency of transmitting information over a channel by adjusting the signal constellation or the way bits are mapped to signal points. The primary goal of shaping codes is to optimize the transmission rate while minimizing the impact of noise and errors introduced by the channel.
Slepian–Wolf coding is a concept from information theory that refers to a method for compressing correlated data sources. It addresses the problem of lossless data compression for distinct but correlated sources when encoding them separately. Named after David Slepian and Jack Wolf, who introduced the concept in their 1973 paper, Slepian-Wolf coding demonstrates that two or more sources of data can be compressed independently while still achieving optimal overall compression when the dependencies between the sources are known.
"Snake-in-the-box" is a combinatorial game or puzzle that involves placing a sequence of elements (often represented as "snakes") into a confined space (the "box") according to certain rules. The objective is typically to maximize the number of elements placed or to achieve a specific arrangement without violating the established constraints. The term can also refer to specific mathematical or graph-theoretic concepts.
A soft-decision decoder is a type of decoder used in communication systems and coding theory that processes signals with more information than simple binary values. In contrast to hard-decision decoding, which makes binary decisions (typically 0 or 1) based solely on whether a signal surpasses a certain threshold, soft-decision decoding considers the reliability of the received signals.
A Soft-in Soft-out (SISO) decoder is a type of decoding algorithm used in various communication systems, particularly in the context of error correction codes, such as Low-Density Parity-Check (LDPC) codes and turbo codes. The "soft" aspect refers to how the decoder processes information.
The Srivastava code is a method of encoding the decimal digits of numbers into a binary format for efficient transmission and storage in digital systems. It is particularly used in applications like data compression, telecommunications, and digital signal processing.
Stop-and-wait ARQ (Automatic Repeat reQuest) is a simple error control protocol used in data communication and networking to ensure reliable data transmission. It is primarily employed in scenarios where a sender transmits data packets to a receiver, and it needs to confirm the successful receipt of each packet before sending the next one.
A summation check is a verification method used to ensure the accuracy and integrity of a set of data or numerical values. It typically involves calculating the sum of a series of numbers and then comparing that sum against an expected value or a previously calculated total to confirm that all entries are correct and consistent. Summation checks are commonly used in various contexts, such as: 1. **Data Entry and Accounting**: To verify that the total calculated from a list of transactions (e.g.
Time Triple Modular Redundancy (TTMR) is a fault-tolerance technique used primarily in systems where high reliability is essential, such as in aerospace, automotive, and safety-critical applications. TTMR is an extension of the traditional Triple Modular Redundancy (TMR) approach but incorporates a temporal element to enhance error detection and correction. In a standard TMR system, three identical modules (often referred to as "units" or "nodes") process the same input data simultaneously.
A Transverse Redundancy Check (TRC) is a type of error-checking mechanism used in data communication and storage systems to detect errors in data that may have occurred during transmission or storage. The TRC algorithm is designed to enhance the reliability of data by adding an additional layer of error detection beyond simple parity checks or checksums. Here's an overview of how TRC works: 1. **Data Structure**: The data is organized in a matrix format, typically as rows and columns.
Triple Modular Redundancy (TMR) is a fault-tolerant technique used in digital systems, particularly in safety-critical applications like aerospace, automotive, and industrial control systems. The fundamental idea behind TMR is to enhance the reliability of a computing system by using three identical modules (or systems) that perform the same computations simultaneously. Here's how TMR typically works: 1. **Triple Configuration**: The system is configured with three identical units (modules).
Turbo codes are a class of high-performance error correction codes used in digital communication and data storage systems. They were introduced in the early 1990s by Claude Berrou, Alain Glavieux, and Olivier Thitimajshima. Turbo codes are designed to approach the theoretical limits of error correction as defined by the Shannon limit, making them highly effective in ensuring reliable data transmission over noisy channels.
The Viterbi algorithm is a dynamic programming algorithm used primarily in the field of digital communications and signal processing, as well as in computational biology, natural language processing, and other areas where it is necessary to decode hidden Markov models (HMMs). ### Key Features of the Viterbi Algorithm: 1. **Purpose**: The algorithm's primary goal is to find the most likely sequence of hidden states that results in a sequence of observed events or outputs.
The Viterbi decoder is an algorithm used primarily in the field of digital communications and information theory for decoding convolutional codes. A convolutional code is a type of error-correcting code used to improve the reliability of data transmission over noisy channels. The Viterbi algorithm is designed to find the most likely sequence of hidden states (the message or data) given a sequence of observed events (the received signals), using dynamic programming to efficiently compute the solution.
The water-filling algorithm is a technique used in various fields such as information theory, signal processing, and control theory, particularly for optimizing resource allocation under power constraints. It is often applied in problems involving multiple channels or dimensions, such as in the context of multiuser communication systems (like MIMO systems), where multiple users share the same communication medium.
The Wozencraft ensemble refers to a specific group of systems used in signal processing and information theory, particularly in the context of coding and communication. Named after the American computer scientist and engineer John Wozencraft, this ensemble is often used in discussions related to the performance of various coding schemes, especially in the theory of error correction. In information theory, ensembles typically involve collections of random variables or systems that are analyzed to derive general properties or to optimize performance metrics such as capacity or reliability.