Strong electrolyte

A strong electrolyte yields essentially all ions from its dissolved substance in the specified solvent and conditions. Strength does not specify concentration.

For dissolved sodium chloride in dilute water, one dissolved formula unit supplies one sodium cation and one chloride anion. For hydrogen chloride in water, ions instead arise by proton transfer to the solvent, giving hydronium and chloride. Thus separating existing ions by dissociation of an ionic compound and producing ions from neutral molecules by ionization can both give a strong electrolyte.^[ref]

The denominator in “essentially all” is the dissolved inventory. Solubility asks how much enters the chemical solution; electrolyte strength asks what happens to the part that enters. A sparingly soluble ionic compound can therefore have an essentially fully dissociated dissolved portion. Undissolved solid does not count as neutral dissolved chemical species, and low electrical conductivity alone does not establish a weak electrolyte.^[ref]

The diagram's weak electrolyte has the smaller converted fraction but more ions in the same volume: ten charged symbols versus four. Even at equal total ion concentrations, different ion drift velocities can give different electrical conductivities. Strength is useful for predicting dissolved chemical species in chemical equations; concentration and transport properties are additionally needed to predict electric current.

An inspected motivating experiment is Harvard Natural Sciences Lecture Demonstrations' Conductivity of Solutions by Harvard Natural Sciences Lecture Demonstrations, Setting it Up. Separate labeled beakers hold aqueous sodium chloride, sucrose, acetic acid and hydrochloric acid samples specified at $0.10\mathrm{mol}{\mathrm{L}}^{-1}$, with about $150\mathrm{mL}$ in $250\mathrm{mL}$ beakers; distilled water supplies a blank. Metal electrodes enclosed in tubing connect to a lamp. The readout is lamp brightness; the page reports that an ionic chemical solution lights the lamp. A separate deionized-water rinse station limits carryover between samples.^[ref]

For a controlled interpretation, keep electrode spacing and immersed area fixed, compare at the same temperature, and recheck the blank after rinsing. These are additional controls: the page supplies no numerical electrode geometry, temperature or calibration. Brightness supports the presence of mobile ions; it cannot alone measure the converted fraction because concentration, ion mobility and circuit response also matter. Its classification of insoluble compounds as weak should not replace the dissolved-inventory distinction above.^[ref]