If is an open subgroup, each left coset is open because left translation is a homeomorphism in a topological group. Its complement is the union of all the other cosets,
This is open, so is closed. No compactness or separation assumption is required.
Both data augmentation and the expectation-maximization algorithm introduce latent variables that make the complete-data model easier to handle. The observed-data likelihood is obtained by summing or integrating over the missing data, and both methods use the conditional law of given the observations and current parameters.
In data augmentation for Bayesian inference, one alternates random draws
These are Gibbs sampler updates on the joint posterior distribution; marginal parameter draws explore the whole posterior, including uncertainty, provided the chain converges appropriately. The parameter conditional incorporates its prior.
The expectation-maximization algorithm is instead a deterministic optimization procedure. Its E step forms
and its M step maximizes this function over . Exact steps do not decrease the observed-data likelihood function. Their aim is a likelihood stationary point, often a local maximum, rather than draws from a parameter distribution. Adding a log prior to the maximization gives a posterior-mode version, which still does not sample the posterior.
Data augmentation samples conditional missing data and parameters; EM averages the complete-data log likelihood and optimizes parameters. The E step is an expectation of the log likelihood, not the log of an averaged likelihood, and generally is not equivalent to merely replacing each missing value by its conditional mean. A Monte Carlo E-step approximation is a further variant of EM, not automatically the same procedure as a data augmentation chain.
Both the Metropolis–Hastings algorithm and the Gibbs sampler construct a Markov chain with a specified target distribution, usually a posterior distribution known only up to normalization. For a proposal density and target density , the Metropolis–Hastings acceptance probability is
After drawing , move there with this probability; otherwise stay at . The unknown normalizing constant of cancels. The original Metropolis algorithm uses a symmetric proposal, , so the proposal-density ratio disappears. The general Metropolis–Hastings algorithm permits nonsymmetric proposals and needs that correction.
A Gibbs sampler instead chooses a coordinate or block and draws directly from its full conditional distribution, leaving the other coordinates fixed. It is exactly a conditional Metropolis–Hastings update whose proposal is that full conditional. For a change from to with fixed, the acceptance ratio is
Thus a Gibbs update is an always-accepted Metropolis–Hastings update with the full conditional as proposal. This statement concerns each update: a systematic sweep of several Gibbs kernels preserves the target but need not itself be reversible.
When the full conditional distributions are easy to sample, a Gibbs sampler avoids proposal tuning and rejection, and is particularly convenient for conjugate priors and data augmentation. When a conditional cannot be sampled directly, a Metropolis–Hastings algorithm can use only its evaluable density; such an update can also be inserted into a Gibbs sweep. Block or joint Metropolis–Hastings proposals can move efficiently along strongly correlated directions for which coordinate-wise Gibbs updates mix slowly. Conversely, a badly chosen Metropolis–Hastings proposal can reject most moves or make only tiny moves. Acceptance probability one by itself does not guarantee rapid exploration. Both methods require appropriate irreducibility and convergence checks before their long-run averages are useful posterior estimates.
Group the two terms containing to obtain the mixture distribution
The first component is a Standard Cauchy distribution. The second is normalized because
For this symmetric component, let . Its density is , and hence its cumulative distribution function and quantile function are
The independent sign is positive or negative with equal probability. For one sample, use the next three independent uniforms in the given sequence and return
The Cauchy branch follows from its quantile function, while the other branch follows from the magnitude law and fair sign just derived. Independence of the branch selection and component draws therefore gives exactly the displayed mixture distribution. Discard the zero-probability endpoint draw to keep the computation finite, and use a fresh block of three uniforms for the next sample. This is the symmetric rational mixture sampler.
One can alternatively use the root solution's rejection sampling with a Standard Cauchy distribution proposal. The density ratio is , bounded by because . Accept the Cauchy draw with probability using a fresh independent uniform.
Substitute , with , when integrating the target density. Since , its cumulative distribution function is
Inverting gives the arcsine distribution sampler
The inverse transform sampling proof in the root solution shows that it has the required probability density function. Use successive independent uniforms for successive samples. A draw at the endpoint one can be discarded if values strictly inside the support are desired; this event has probability zero under the ideal continuous uniform distribution.
In agglomerative hierarchical clustering, start with eight singleton groups. Single-linkage clustering uses the smallest distance between cross-pairs; complete-linkage clustering uses the largest. Updating these cluster distances after each merge, one valid order of the tied merges gives
The merges at height may be reordered; they give the same requested three-cluster cuts. For example, the single-link distance from to is , while its complete-link distance is their maximum . After forming , its single-link distance to is . The complete-link distance between and is . Finally the closest cross-pair between and is at , while the farthest is at .
At three groups the partitions are therefore
Two groups, and , are more strongly supported by the merge heights. For single linkage the three-to-two merge is at , close to the preceding height , whereas the two-to-one merge is delayed until . For complete linkage the three-to-two merge at is close to , whereas the final merge jumps to . Both methods agree on the two-group partition but split its second group differently when forced to return three groups. A three-group choice is possible if required substantively, but is not particularly compelling from these dissimilarities alone.
For rows , three useful choices are Euclidean distance, standardized Euclidean distance, and Mahalanobis distance:
The Euclidean choice is simple, rotation invariant and appropriate when the original coordinate scales carry comparable meaning. It is sensitive to scale changes, may be dominated by a high-variance variable and gives correlated or duplicate variables repeated influence. Squared Euclidean dissimilarity is sometimes used algorithmically, but removing the square root generally loses the triangle inequality.
The standardized Euclidean choice removes marginal units using fixed positive sample scales . It gives equal marginal weight to variables, but ignores correlations and can magnify noise when an estimated variance is small. Constant variables require omission or an explicitly chosen positive external scale.
The Mahalanobis choice incorporates the full positive-definite sample covariance , so it is Euclidean distance after whitening. It accounts for both scale and redundancy and is invariant under an invertible change of coordinates when is transformed consistently. However estimating requires enough observations and can be sensitive to extreme values; inversion is unstable near singularity and unavailable when is singular. With fixed positive scales or positive-definite , all three square-root expressions are genuine metrics on the measurement space. Their different geometries encode different notions of which individuals should be considered similar.
The given equicorrelation covariance matrix can be written
On , the rank-one matrix acts as multiplication by four. On the three-dimensional orthogonal complement it acts as zero. Hence the eigenvalues are and with multiplicity three.
For , the largest eigenvalue is and its normalized eigenvector is . Therefore the first population principal component is
Omitting the centering merely changes the component by a constant and has no effect on its variance. Since , its explained fraction is
It rises from one quarter towards one as the positive common correlation increases. Outside the specified range, a valid covariance requires ; for negative the sum direction is no longer the leading one.
Principal component analysis replaces correlated measurements by uncorrelated linear compounds ordered by decreasing variance. Keeping the leading compounds gives a low-dimensional summary that preserves as much variance as possible under orthonormal projection. It is an unsupervised description of variation, rather than a guarantee that the high-variance directions are best for classification or prediction.
Write . For a unit loading vector , the variance of is . The spectral theorem gives an orthonormal eigenbasis with eigenvalues . If and , then
Equality is attained at . Requiring the next loading to be orthogonal to the first excludes its eigendirection, so the same argument gives and variance , and continues inductively. Repeated eigenvalues permit any orthonormal basis of the tied eigenspace. These are the population principal components.
With , set . Then
In particular the components are uncorrelated. They need not be independent unless, for example, is multivariate normal. Finally
The trace equality follows from and cyclicity of trace, so the rotation preserves total variance. The explained variance of a principal component is its eigenvalue divided by this total.
For common positive-definite covariance, subtracting the two Gaussian log densities cancels the quadratic term. Equal priors leave the linear discriminant analysis score
Here
Thus
Assign class two if the expression is negative; a tie has zero probability under either continuous Gaussian law.
To compute the error rather than just specify the boundary, put . Within class one the score has mean , and within class two mean . In both classes its variance is . Hence both conditional error probabilities are , where is the standard normal distribution function. Equal priors give the equal-covariance Gaussian classification error
For the specified observation, the score is , so assign it to class one.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact