 Aerodynamic interference

Aerodynamic interference occurs when nearby bodies alter one another's fluid flow, so their combined aerodynamic loads differ from the sum measured separately under a specified comparison. Pressure fields, boundary layers and fluid wakes can all participate. An aircraft assembly therefore needs an operating-condition definition as well as a list of parts.

A factorial contrast for aerodynamic interference makes that definition measurable. At the same dynamic pressure, model orientation and mounting convention, record a balance reading $D_{ij}$ with component A absent/present according to $i$ and component B absent/present according to $j$. The departure from additivity isThe empty-configuration reading $D_{00}$ matters: it prevents a common support background from being subtracted twice. For original illustrative readings $(D_{00},D_{10},D_{01},D_{11})=(2,22,7,32)\mathrm{N}$, the interaction is $5\mathrm{N}$. This aircraft component drag interaction is a property of the stipulated four configurations and conditions.

Kenneth E. Ward's 1931 experiment supplied an early concrete comparison. A Göttingen 387 wing was tested with struts in different upper- and lower-surface positions in a variable-density wind tunnel; separate strut measurements helped distinguish direct strut drag from interaction. Interference could be as large as the struts' own drag.^[ref]

The contrast does not identify the responsible flow mechanism by itself. Surface pressure measurements and observations of flow separation can test where the changes occur. Comparing at fixed angle of attack also differs from comparing at fixed lift: adding a component can change lift, requiring a new angle or an explicitly documented interpolation for the latter comparison. A negative contrast is possible; interaction can reduce the chosen load as well as increase it.