 Average power of a laser pulse train

The average power of a laser pulse train is its integrated radiant energy per observation time. If an interval $T$ contains $N$ complete pulses, with no uncounted edge contributions or continuous background,Thus the relevant pulse repetition frequency is the actual emitted-pulse rate in the interval. Historical calorimetric calibrations inferred average power and pulse energy from total received energy, injection time and pulse rate.^[ref]

An original counting example exposes a possible cancellation of errors. A nominal $100\mathrm{kHz}$ trigger produces 200 triggers in $2\mathrm{ms}$. Suppose only 180 complete optical pulses arrive, each carrying $0.20\mu \mathrm{J}$. Their total is $36\mu \mathrm{J}$, so the pulse contribution is $18\mathrm{mW}$, corresponding to an actual 90kHz pulse rate. Add a continuous optical background of $2\mathrm{mW}$, and a detector integrating everything reads $20\mathrm{mW}$.

Dividing that total by the nominal trigger rate would happen to give $0.20\mu \mathrm{J}$, despite both the missing pulses and the unremoved background. Removing the background but still using the nominal rate would instead infer $0.18\mu \mathrm{J}$, ten percent below the actual emitted-pulse energy. This missing-pulse bias in average-power inference cannot be diagnosed from the apparently reasonable quotient alone. A pulse-resolving monitor and a suitable background subtraction distinguish the two contributions.

For bursts or variable repetition, count the pulses in the same interval as the energy measurement. A slow integrating detector can establish their mean energy after these corrections but does not resolve pulse-to-pulse energy fluctuation or optical peak power. Laser pulse energy separates these observables.