 Gear axial pitch

Gear axial pitch $p_x$ is the axial repeat distance between corresponding flanks of successive teeth of a cylindrical helical gear. The measurement follows a line parallel to the rotation axis on a concentric cylinder. It is not the axial advance of one tooth helix through an entire revolution; that larger distance is gear lead $L$. For $N$ equally spaced teeth, $L=N{p}_x$.^[ref]

On the developed cylinder, neighboring tooth traces separated transversely by gear transverse pitch $p_t$ intersect a fixed circumferential coordinate at axial positions separated by $p_x$. Their slope givesFor $d=60\mathrm{mm}$, $N=30$ and gear helix angle $|\beta |=30{}^{\circ }$, $p_t=2\pi \mathrm{mm}$ and $p_x=2\pi \sqrt{3}\mathrm{mm}\approx 10.8828\mathrm{mm}$. The corresponding gear normal pitch is only $5.4414\mathrm{mm}$. These two distances differ by a factor of two in this example because $\sin 30{}^{\circ }=1/2$.

For an engaged gear face width $b=20\mathrm{mm}$, the ideal gear overlap ratio is $b/p_x\approx 1.8378$: successive tooth-contact traces span about1.84 axial pitches across the face. Holding $p_t$ fixed while letting $\beta$ tend to zero makes $p_x$ diverge. Straight spur gear tooth traces do not cross an axial generator successively, so a finite axial-pitch interpretation does not survive that limit. Helix hand determines orientation; the positive pitch magnitude alone does not specify hand.