 Gear sliding velocity

Gear sliding velocity is the relative tangential surface velocity at a tooth contact. It must distinguish the common point where the tooth surfaces touch from the two material points instantaneously occupying it. For an ideal fixed-axis external involute pair, relative normal velocity vanishes, but relative tangential velocity generally does not. It is zero at the gear pitch point and grows with distance from it along the gear line of action.^[ref]

Let $P$ be the pitch point, $Q=P+s\mathbf{n}$ a contact point and $\mathbf{n}$ a unit direction along the line of action. Use a common positive rotation axis $\hat{\mathbf{z}}$ for both signed angular velocities. The rigid-body velocity law givesSubtracting these expressions and using equal velocities at $P$ givesThe result is perpendicular to the common normal, as the contact constraint requires. External gears rotate in opposite directions, so the sliding-speed magnitude is $(|{\omega }_1|+|{\omega }_2|)|s|$, rather than their speed difference in magnitude.

For ${\omega }_1=50rad/s$ and ${\omega }_2=-25rad/s$, at $s=4\mathrm{mm}$ the signed tangential sliding velocity is $0.30m/s$; at $s=-4\mathrm{mm}$ it is $-0.30m/s$. Both vanish at $P$. Doubling both shaft speeds doubles gear sliding velocity at the same contact location, while leaving the ideal gear ratio unchanged. This connects geometry and running speed to gear sliding-friction loss. The formula concerns a two-dimensional spur gear contact; general three-dimensional contact requires the complete surface velocities and common normal.