 Modal damping coupling

Modal damping coupling is the interaction between undamped modal coordinates produced by off-diagonal entries of the modal damping matrix. With mass-normalized modes and $D={\Phi }^{T}C\Phi$, the equations areThus $D_{ij}{\dot{q}}_j$ contributes to mode $i$'s force when $j\ne i$. Distinct undamped natural frequencies fix the modal directions up to scaling and ordering; repeated-frequency subspaces admit additional basis rotations and must be treated before interpreting an off-diagonal entry as unavoidable nonclassical damping.^[ref]

For an original example, takeIts eigenvalues are $0.5$ and $0.1$, so it is positive definite. At modal velocities $\dot{q}=(1,-2{)}^T$, total dissipated power isA diagonal-only approximation would give1.5 instead, despite leaving both diagonal coefficients unchanged.

The individual modal energies $E_i=\frac{1}{2}({\dot{q}}_i^2+{\omega }_i^2{q}_i^2)$ obey, with no external forcing,For these velocities, ${\dot{E}}_1=+0.1$ while ${\dot{E}}_2=-0.8$: one modal energy grows temporarily, even though the total falls at rate0.7. This modal energy transfer is compatible with a passive mechanical network; it is not evidence that an external energy source drives the growing coordinate.

For harmonic forcing, the complete response solvesOff-diagonal effects therefore depend on forcing frequency and the other dynamic terms, not solely on the size of $D_{ij}$ relative to $D_{ii}$. Neglecting them is an approximation whose error can be enhanced near nearby resonances. Solving the coupled equations or the damped quadratic eigenvalue problem retains those interactions; assigning independent scalar damping ratios does not, by itself, justify dropping them.