 Solution

The shallow-water approximation requires the depth to be small compared with the horizontal scale of variation, small vertical accelerations and nearly hydrostatic pressure. Take cross-sectionally uniform lower-layer velocity and a sufficiently deep, effectively stationary upper layer. Under the Boussinesq approximation, $g^{\prime }=g({\rho }_1-{\rho }_0)/{\rho }_0$ is the reduced gravity. Conservation of lower-layer volume gives constant discharge $Q=bhu$.

Dividing the Bernoulli equation by $g^{\prime }$ gives the shallow-water specific energyAt fixed $Q,b$, the energy curve has its minimum at the critical depth $h_c=(Q^2/(g^{\prime }{b}^2){)}^{1/3}$, where $E_c=3h_c/2$. Above this minimum there are two depth branches: deeper subcritical flow has $F<1$, and shallower supercritical flow has $F>1$.

The two long-wave speeds relative to the bed are $u\pm \sqrt{g^{\prime }h}$. In subcritical flow one family can propagate upstream and one downstream; in supercritical flow both travel downstream for $u>0$. At hydraulic control, $u-\sqrt{g^{\prime }h}=0$, and a smooth transcritical solution must also satisfy the geometric regularity condition. The flow may remain entirely on either branch, cross smoothly through the control from subcritical to supercritical, or take the reverse smooth branch under appropriate boundary conditions. A downstream hydraulic jump can return supercritical flow to the subcritical branch while losing energy.

The sketch distinguishes smooth branch changes at a critical section from a jump: a jump conserves mass and momentum, not the original Bernoulli head.