 Solution

A reactor coolant must remove heat reliably while remaining compatible with the core. Desirable properties include adequate heat capacity and heat transfer, manageable viscosity and pumping demand, stability over the operating range, limited corrosion of fuel and structures, acceptable neutron absorption and activation, and a tolerable leakage or chemical-reaction hazard. water is a standard example in light-water reactors: it transfers heat well and also moderates, but pressure, boiling behaviour, corrosion chemistry and loss of inventory must be managed. No single reactor coolant is best independently of reactor design.

A control-rod material must absorb neutrons effectively and retain mechanical and chemical integrity. It needs a suitable absorption cross section over the relevant spectrum, adequate absorber inventory over life, manageable capture heating and transmutation products, and compatibility with its sheath and reactor coolant. boron carbide is an example. Depletion, gas generation, radiation-induced swelling and cracking must be allowed for; a large initial cross section alone does not establish lifetime performance.

A neutron moderator must slow neutrons efficiently while absorbing relatively few. Light nuclei provide effective energy transfer per collision, but absorption, density, radiation stability, purity and temperature-dependent properties determine the usable moderation. heavy water is an example combining effective slowing with low parasitic absorption; graphite is another possible material in different designs. Heat removal and compatibility remain necessary even though moderation is its principal neutronic role.

nuclear fuel cladding must retain fuel and fission products while transferring heat and carrying load. Desirable properties include corrosion resistance, low neutron absorption, adequate thermal conductivity, strength and ductility, resistance to irradiation growth, void swelling and creep, and compatibility with fuel and reactor coolant. A zirconium alloy such as Zircaloy is a light-water-reactor example. Hydrogen uptake, corrosion and irradiation response constrain service; the low absorption benefit does not eliminate these materials problems.