Thermal conductivity ($k$)

Thermal conductivity is the material response coefficient in Fourier's law. For an isotropic material it is a scalar $k$, with units $\mathrm{W}{\mathrm{m}}^{-1}{\mathrm{K}}^{-1}$; larger positive $k$ means a larger conductive heat flux for the same temperature gradient. It can depend on temperature and composition. Direction-dependent response in an anisotropic material is described by a thermal conductivity tensor. The two worked examples use stipulated positive constants, rather than measured values for named materials.

Thermal conductivity describes material response, whereas thermal resistance also includes geometry: for the steady bar, $R_{\mathrm{th}}=L/(kA)$. Doubling $k$ at fixed length, cross-sectional area and end temperatures halves thermal resistance and doubles the rate of heat transfer. Doubling length changes thermal resistance without changing the material's thermal conductivity. This distinction lets a designer improve cooling either by choosing a higher thermal conductivity or by shortening and widening the path. It also explains why the less conductive layer in thermal resistance takes the greater temperature drop.

Thermal diffusivity answers a different question: how rapidly a temperature disturbance spreads. Its usual model $\kappa =k/(\rho c_p)$ also involves mass density $\rho$ and specific heat capacity $c_p$, so equal thermal conductivities need not imply equal rates of warming.

In an isotropic near-equilibrium quasiparticle transport picture, an angular average of squared velocity components supplies the factor1/3. Mode-resolved heat capacities times $v_g^2\tau$ then sum to thermal conductivity. Replacing them by $C⟨v⟩\ell /3$ is a characteristic-scale approximation, not an exact product of separately chosen averages. A solid can use this kinetic structure because mobile phonon and electron excitations transport energy even when the constituent atoms remain localized.

The Wiedemann-Franz law relates the electronic thermal conductivity of a normal degenerate metal to its electrical conductivity:An isotropic kinetic theory estimate gives $K_e=c_e{v}_F^2{\tau }_Q/3$. With electronic heat capacity density $c_e={\pi }^{2}n{k}_B^{2}T/(2E_F)$, $v_F^2=2E_F/m^{\ast }$ and $\sigma =n{e}^2{\tau }_{\sigma }/m^{\ast }$, the ratio is $L_0{\tau }_Q/{\tau }_{\sigma }$. Approximately elastic scattering with a smooth energy dependence gives equal heat and charge relaxation times. Inelastic electron-phonon scattering can make them different; the law also concerns the electronic contribution, not additional lattice heat conduction.^[ref]

For a degenerate isotropic parabolic electron band, electrical conductivity is $\sigma =n{e}^2{\tau }_{\sigma }/m$ and electronic thermal conductivity is ${\kappa }_e={\pi }^{2}n{k}_B^{2}T{\tau }_{\kappa }/(3m)$. Their ratio is ${\kappa }_e/(\sigma T)=L_0{\tau }_{\kappa }/{\tau }_{\sigma }$, where $L_0=({\pi }^2/3)(k_B/e{)}^2$ is the Lorenz number. Nearly elastic scattering that relaxes charge and heat currents similarly gives ${\tau }_{\kappa }\simeq {\tau }_{\sigma }$ and the Wiedemann-Franz law. Inelastic scattering can relax heat current and directed momentum differently, invalidating the simplest identification even in a good metal.

The Lorenz number is the ratio $L=K_e/(\sigma T)$. The Sommerfeld value $L_0=({\pi }^2/3)(k_B/e{)}^2\simeq 2.44\times 10^{-8}\mathrm{W}\mathrm{\Omega }{\mathrm{K}}^{-2}$ applies under the assumptions of the Wiedemann-Franz law. The ratio must use electronic thermal conductivity if lattice heat flow is appreciable.

A thermal conductivity tensor relates a temperature gradient to conductive heat flux through $\mathbf{q}=-K\nabla T$. For an anisotropic material, its components can differ between directions, so the heat flux need not be parallel to $-\nabla T$. Choosing principal axes of a symmetric $K$ identifies the principal conductivities.

The local thermal contribution to entropy production isFor passive reciprocal conduction, a symmetric positive-semidefinite $K$ gives a nonnegative value; strictly positive conductivities give positive definiteness. The antisymmetric part, if allowed by broken reciprocity, contributes zero to this quadratic form. Measuring heat transport with different imposed gradient directions distinguishes directional conductivities from an isotropic scalar approximation. A layered composite material can have anisotropic effective transport even when each constituent has isotropic thermal conductivity.