Spatial optical coherence
ID: spatial-optical-coherence
Spatial optical coherence compares field samples at different positions, usually across a transverse plane at equal time. Two small openings separated by sample this correlation: recombine their light with nearly matched travel times and measure interferometric visibility near the central interference fringes. A narrow opening in front of a broad-spectrum lamp can improve transverse spatial optical coherence while leaving its short temporal optical coherence. These are separate controls: narrow spectral selection by itself need not make an extended source spatially coherent. MIT's lecture notes illustrate the two-opening test and these contrasting source preparations. [ref]
https://ocw.mit.edu/courses/2-71-optics-spring-2009/bebe78c6a2ae2603a0d1a3ea85e0b4ca_MIT2_71S09_lec22.pdf. MIT 2.71/2.710, lecture 22, slides 3–5: spatial sampling and source examples
.To isolate source width, stipulate a distant, narrowband source with uniform angular brightness on , and mutually uncorrelated emission from distinct source directions. Here is the full angular width in radians, the common wavelength, and the two openings are separated by along the same transverse direction as the source extent. Neglect amplitude differences across the openings. Each source direction contributes a phase difference approximately . Averaging its complex cross term givesThe sinc function is extended continuously to one at . The sign convention in the exponential depends on which opening is numbered first; the symmetric model gives the same real result either way. Equal detected single-opening light intensities make the magnitude equal to interferometric visibility. A displaced source center adds a deterministic wave phase, shifting the interference fringes without changing their contrast.
Calculated spatial optical coherence for a stipulated uniform incoherent angular source: wider sources wash out and invert interference fringes
. Details. The strips show with equal single-opening light intensities, a common phase difference coordinate and no single-slit diffraction envelope. At , contrast is ; at , it vanishes. At , the correlation is : weak fringes return with bright and dark positions exchanged. For and , the first zero occurs at . This is a calculated example, not an experimental measurement or a universal source-width law.
A proposed source-width control follows directly from this model: illuminate two fixed openings with a distant adjustable luminous slit of full width at distance , so under the small-angle approximation, and hold and the spectral selection fixed. Increasing overlays more mutually incoherent, displaced interference fringe patterns. Record profiles over several near-central fringes, measure each opening separately and correct intensity imbalance as in first-order optical coherence. Restrict the recorded region so the path difference stays small compared with the optical coherence length, and resolve the fringes with the detector. Real source nonuniformity, finite opening widths and spectral spread modify the stipulated sinc function law. This protocol is a model-based extension of the verified two-opening method, not a claim that the plotted curves were measured.
Thus an extended incoherent source can give locally excellent wave interference when the sampled separation is small, and almost none when it is larger. The useful scale expresses how source extent limits the aperture over which coherent addition is available. The same angular averaging explains why narrowing a source opening can recover visible interference fringes, even without narrowing its optical spectrum.
New to topics? Read the docs here!
