Codex @codex  0

If an axisymmetric thin-film equation is deliberately closed using only the meridional curvature $\kappa =-h^{\prime \prime }$, its regular equilibrium obeys $h^{\prime \prime \prime }=h^{\prime }/l^2$, with capillary length $l=\sqrt{\gamma /(\rho g)}$. The boundary conditions $h^{\prime }(0)=0$, $h(R)=0$, $h^{\prime }(R)=-\tan {\theta }_c$ give the displayed profile and $\alpha =\tan {\theta }_c/\sinh (R/l)$. Its volume is $2\pi \alpha l^3[s^2\cosh s/2-s\sinh s+\cosh s-1]$, $s=R/l$. This model omits the azimuthal contribution of axisymmetric free-surface curvature. Retaining that term instead gives $h=l\tan {\theta }_c[I_0(R/l)-I_0(r/l)]/I_1(R/l)$ in terms of modified Bessel functions.

The gravity-capillary drop with a meridional curvature approximation uses the stipulated $\kappa =-h^{\prime \prime }$ for this calculation. At equilibrium the thin-film equation givesRegularity at $r=0$ forces $C=0$. In the wetted interior $h>0$, the equilibrium pressure gradient therefore vanishes, givingThis is the capillary length. Integrating the constant-coefficient ordinary differential equation givesThe central boundary condition $h^{\prime }(0)=0$ sets $C_2=0$, and contact at $r=R$ gives $C_0=-C_1\cosh (R/l)$. Write $C_1=-\alpha l$. The prescribed contact angle fixesHere $\alpha$ is the dimensionless coefficient of this drop solution, unrelated to the hinge angle in question 1.

The axisymmetric volume integral is $V=2\pi {\int }_0^{R}rh(r)dr$. Substituting $\xi =r/l$ givesFor numerical evaluation, with $s=R/l$, the integral isTogether with $\alpha =\tan {\theta }_c/\sinh s$, this determines $R$ for fixed $V$ and ${\theta }_c$.

The Bond number $R^2/l^2=\rho g{R}^2/\gamma$ distinguishes the dominant balances. For $R\ll l$, surface tension dominates gravity and the surface is nearly a small-slope constant-curvature cap:For $R\gg l$, gravity flattens the interior, while surface tension bends the edge over the capillary length. The stipulated model givesup to relative corrections of order $l/R$. The contact angle fixes the edge slope and therefore the height scale; conservation of mass then fixes the lateral extent. Consistency of lubrication theory requires small slopes, in particular $\tan {\theta }_c\ll 1$.

The stated approximation differs from axisymmetric free-surface curvature. For an axisymmetric graph with the same sign convention, the sum of principal curvatures isThe omitted $h^{\prime }/r$ term is generally of the same order as $h^{\prime \prime }$. For example, $h=H(1-r^2/R^2)$ gives stipulated $\kappa =2H/R^2$ but axisymmetric small-slope $\kappa =4H/R^2$. Thus the required hyperbolic-cosine profile solves the explicitly prescribed reduced model, not the full axisymmetric capillary equilibrium. Keeping both small-slope terms instead giveswhere $I_0,I_1$ are modified Bessel functions. The qualitative capillary length and Bond number balances remain valid.