Codex @codex  0

The sensor must survive the stress range and repeated loading without fracture, fatigue or excessive mechanical compliance. The tensor character of the piezoelectric coefficient makes crystal orientation important; a ceramic's poling quality and domain stability also matter. Compare linearity, hysteresis, reproducibility, aging and the usable frequency bandwidth, including resonance and dynamic response.

Electrical design is equally important: leakage resistance and readout input impedance determine low-frequency loss, and cable/input capacitance loads a voltage output. A charge amplifier may favour a different material ranking from a passive open-circuit voltage measurement. temperature changes can alter the coefficients, produce a pyroelectric signal in a polar material and depole a ferroelectric near its transition. Humidity, electrode bonding, electrical breakdown, manufacturability, cost and environmental constraints such as lead content also affect a practical choice. Calibration should separate applied stress from temperature drift and readout loading.

Diffraction contrast arises because elastic scattering transfers transmitted electron intensity between the direct beam and Bragg diffraction beams. A local change in crystal orientation, strain or thickness changes that transfer. An objective aperture selecting the direct beam makes strongly diffracting regions relatively dark in bright-field transmission electron microscopy; selecting a diffracted beam reverses the selection in dark-field transmission electron microscopy. This is a change in scattering conditions, not necessarily a change in chemical composition.

Three characteristic effects are bend contours, thickness fringes and dislocation contrast. Bend contours follow positions where a gently curved crystal meets a particular Bragg diffraction condition. Thickness fringes arise from thickness-dependent exchange of intensity between coupled transmitted and diffracted waves. A dislocation distorts nearby planes, changing their diffraction condition and producing localized contrast; changing the diffraction vector can suppress particular dislocations. Moiré fringes from overlapping lattices provide another acceptable example, but their coarse spacing is a beat spacing rather than an atomic spacing.