Codex @codex  0

The addition energy has both charging and orbital terms,The larger diamonds indicate quantum dot shell closure after 2, 6 and 12 electrons. A two-dimensional isotropic harmonic oscillator confinement, $V(x,y)=m^{\ast }{\omega }_0^2(x^2+y^2)/2$, explains that sequence: shell $q=n_x+n_y$ has $q+1$ orbital states and capacity $2(q+1)$ after spin degeneracy. The cumulative capacities are $(q+1)(q+2)=2,6,12,20,\dots$. Within a degenerate shell, the extra orbital term vanishes to this approximation; crossing a shell boundary costs an extra $\hslash {\omega }_0$.

The gate capacitance lever arm is ${\alpha }_g=C_g/C_{\Sigma }=1/2$. Large and small gate widths differ by $7-5=2\mathrm{mV}$, so $\hslash {\omega }_0\simeq e{\alpha }_g(2\mathrm{mV})=1.0\mathrm{meV}$. Equivalently the tip energies differ by $3.5-2.5=1.0\mathrm{meV}$. Confinement anisotropy, exchange and disorder would split the ideal degeneracies; the diagram supports approximate shell symmetry rather than proving a perfectly parabolic potential.

Assume the usual one-lead-biased measurement, $V_s=V_{sd}$ with drain grounded and the gate referred to that ground; the printed map does not separately specify the wiring. This assumption is needed to assign individual source/drain capacitances. In this Coulomb diamond capacitance extraction, the smaller zero-bias gate intervals are 5 mV wide. In the constant interaction model with no orbital gap between those additions,An upper diamond tip lies at gate 123.75 mV between the zero-bias vertices 120 and 125 mV and at bias 2.50 mV. Its positive and negative edge slopes are therefore $s_{+}=2.50/3.75=2/3$ and $s_{-}=-2.50/1.25=-2$. Reservoir alignment givesThe gate capacitance is not negligible in the second denominator. ConsequentlyThe consistency check is $e^2/C_{\Sigma }=2.50\mathrm{meV}$, matching the smaller tip's bias energy. The conventional electrostatic charging energy $E_C=e^2/(2C_{\Sigma })$ is 1.25 meV; it is half the charging energy contribution to the addition energy. A different applied-bias convention changes the slope formulas, so the convention must accompany the extraction.