Islanded microgrid operation

Islanded microgrid operation supplies a bounded set of interconnected electrical loads from its local distributed energy resources while the external electric power system connection is open. The microgrid's own equipment must then maintain a usable supply and balance demand. The DOE overview explicitly distinguishes this disconnected mode from grid-connected operation and assigns coordination and connection management to the controller.^[ref]

For an original steady active power balance, local generation supplies $25\mathrm{kW}$ and storage can supply at most $20\mathrm{kW}$. Connected electrical loads request $50\mathrm{kW}$ and network losses are stipulated as $2\mathrm{kW}$. The shortfall isAt least $7\mathrm{kW}$ of the requested demand must be removed, or more usable supply obtained, for this simplified operating point. A full electric battery does not remove the $20\mathrm{kW}$ output limit. Electrical load shedding can balance the remaining demand, but it changes which service is delivered.

Passing the active power calculation is necessary but insufficient. An alternating current island must also sustain appropriate electric potential differences and frequency, accommodate reactive power, and respond to load changes. A power inverter can connect storage to the AC network, but the control capabilities and operating limits of the actual equipment determine whether it can establish or support that supply. The presence of a converter by itself proves none of those capabilities.

A proposed test records the external switch state, individual source power, storage state, load connections, electric potential differences and frequency through the transition into island operation. A load step then tests the local response described by electric power balance during a demand step. Surviving the transition and sustaining the island for a required duration are separate observations; power-rating limit versus energy autonomy in a microgrid explains why both are needed. Reconnection is another controlled operating transition, rather than simply assuming that two energized AC systems already agree in phase.