Bearing (mechanical) 2026-11-05
A mechanical bearing supports relative motion while transmitting constraint forces between machine components. A shaft support can permit rotation while constraining translation, with the permitted motions depending on its construction and arrangement. A ball bearing uses rolling contacts; a journal bearing supports a shaft through a sliding or fluid-film interface. The support reaction is distinct from resistance to the permitted motion: an ideal support can transmit a large transverse force with zero resisting shaft torque.[ref]
Shafts and Bearings by SDP-SI. §4.0, “Bearing Loads”, shaft support reactions and gear-loading cases
For a simple ideal shaft supported at axial positions0 and , an upward load applied at requires reactionsWith , and , the downward support loads are120N and80N. These reactions exist even if the shaft rotates without an applied resisting torque. In a real mechanical bearing, an illustrative frictional resisting moment at angular speed dissipates ; force equilibrium alone does not determine that loss.
A locating bearing arrangement fixes the shaft's axial position relative to the housing, while a non-locating bearing support permits the required axial displacement, for example from thermal expansion. The manufacturer distinguishes this arrangement from adjusted and floating arrangements.[ref]
Rolling bearings by SKF. Section B.2, “Arrangements and their bearing types”, printed p.70, locating/non-locating supports
Radial support does not by itself establish which support carries axial thrust.Selection must therefore consider permitted motion, combined loads, alignment and operating conditions. An idler support reaction determines a shaft-level load; it does not directly give each rolling contact's Hertzian contact pressure or a service-life prediction. Those require the bearing's internal geometry and a suitable load/life model.
Cavitation 2026-10-06
Cavitation is the formation of gas or vapour cavities when a liquid's pressure becomes sufficiently low. A journal bearing model with cavitation must specify how a partly filled film and its boundaries behave, so periodic pressure alone cannot determine the flow there.
Journal bearing Created 2026-10-06 Updated 2026-11-05
A journal bearing supports a rotating axle inside a surrounding cylindrical sleeve with a thin lubricating film. An eccentric gap generates lubrication pressure as rotation transports fluid into and out of narrower regions. A full-film journal bearing model imposes periodic pressure around the entire circumference; a model with cavitation needs additional free-boundary conditions. The two models can predict different loads and dynamics.