 Acquisition-time sensitivity to tail-model parameters

Acquisition-time sensitivity to tail-model parameters measures how an inferred recording extension changes when the assumed optical tail changes. In the positive-duration branch of acquisition duration from an exponential tail-energy tolerance, writeHere $A$ bounds the initial tail power, $\tau$ is its decay time and $\epsilon$ the tolerated missed energy. Their first-order relative effects areThese logarithmic condition numbers of a tail-acquisition requirement distinguish a fractional amplitude error from a fractional decay-time error. For a stringent tolerance with large $\ell$, decay-time sensitivity stays near unity while amplitude sensitivity decreases.

For an original example, take $A=0.20\mathrm{W}$, $\tau =20\mathrm{ns}$ and $\epsilon =0.040\mathrm{nJ}$. Then $A\tau /\epsilon =100$ and $L\approx 92.10\mathrm{ns}$. Let the independent standard uncertainties of $A$ and $\tau$ be $10\%$ and $5\%$, with the tolerance fixed. The amplitude contribution to $u(L)$ is $2.00\mathrm{ns}$; the decay-time contribution is $(1+\log 100)\times 1\mathrm{ns}\approx 5.605\mathrm{ns}$. Adding their variances gives $u(L)\approx 5.95\mathrm{ns}$, about $6.46\%$.

Correlated fitted parameters require covariance terms in this propagation.^[ref] A standard uncertainty is not a guaranteed recording margin: a worst-case requirement needs a justified allowed parameter set, as in the parent article. The zero-duration boundary is also outside this smooth positive-branch calculation.

Physically, these parameters must describe the unrecorded optical power, not merely an electrical detector tail. NIST separately measured the detector/cable/oscilloscope response before correcting pulse measurements.^[ref] A precise fit to the wrong response component does not justify the optical envelope or its acquisition-time bound.