 Barkhausen pulse area

Write the magnetic flux linkage of the stationary pickup coil as $\lambda ={\sum }_{n=1}^N{\Phi }_n$, in SI units of weber. If every turn links the same magnetic flux $\Phi$, then $\lambda =N\Phi$; the turn count is dimensionless. With a fixed winding and terminal convention, Faraday's law of induction gives the induced electromotive forceThis is the fundamental theorem of calculus applied to magnetic flux linkage. Its units are $\mathrm{V}\mathrm{s}=\mathrm{Wb}$, not volts alone. Reversing the leads reverses the sign. In a high-input-electrical resistance voltage measurement the input approximately follows this electromotive force; coil loading and the frequency response of the electronics require separate calibration.

Separate direct drive linkage from material linkage: $\lambda ={\lambda }_{\mathrm{drive}}+{\lambda }_{\mathrm{material}}$. Even an empty pickup coil has $-d{\lambda }_{\mathrm{drive}}/dt$. In an ideal long, uniformly coupled specimen with negligible demagnetizing field correction and eddy current shielding, a useful material approximation isHere $A_s$ is specimen cross-sectional area, not the larger coil aperture; ${\mu }_0$ is vacuum permeability and $M$ the axial magnetization sampled by the coil. The units check directly: $(\mathrm{V}s/(\mathrm{A}\mathrm{m}))({\mathrm{m}}^2)(A/m)=\mathrm{V}\mathrm{s}$. Finite geometry and nonuniform magnetization generally require a calibrated coupling in place of ${\mu }_{0}N{A}_s$. The exact linkage identity survives that failure of the uniform approximation.

As an original illustrative calculation, stipulate $N=100$, $A_s=10^{-6}{\mathrm{m}}^2$, $\Delta M=10^{3}A/m$ and rounded ${\mu }_0=4\pi \times 10^{-7}\mathrm{V}s/(\mathrm{A}\mathrm{m})$. ThenA uniform change over $0.10\mathrm{ms}$ would give a rectangular pulse of $-1.25664\mathrm{mV}$; over $0.20\mathrm{ms}$ it gives $-0.628319\mathrm{mV}$ with the same area. Thus pulse height mixes change size with change speed. These numbers describe an ideal model, not observed pulses or material constants.