 Branch-current mismatch in a resistance ratio measurement

Branch-current mismatch in a resistance ratio measurement is a residual scale error when the sensor and reference resistor carry unequal electric currents. A common supply or common nominal current setting does not establish the shared excitation required by a shared-excitation resistance ratio measurement.

Suppose separate branches carry positive currents $I_T$ and $I_{\mathrm{ref}}$. Ideal potential sensing givesThus the fractional resistance error is exactly $I_T/I_{\mathrm{ref}}-1$. If $I_T=I_0(1+{ϵ}_T)$ and $I_{\mathrm{ref}}=I_0(1+{ϵ}_{\mathrm{ref}})$, the common scale $I_0$ cancels, whileIn an unbranched series circuit the same electric current passes through both components; this particular error instead concerns separate paths, leakage, or unequal effective sampling times.

For an original example, use $R_T=200\Omega$, $R_{\mathrm{ref}}=2000\Omega$, $I_T=1.002\mathrm{mA}$ and $I_{\mathrm{ref}}=0.998\mathrm{mA}$. Their potentials are $0.2004\mathrm{V}$ and $1.996\mathrm{V}$. The inferred resistance is $200.801603\dots \Omega$, high by approximately $0.400802\%$. Each current is only $0.2\%$ from its nominal setting, but the opposed errors add to first order.

A useful ideal comparison is current-source swapping in a resistance ratio measurement. In two otherwise unchanged acquisitions, assign source A to the sensor and source B to the reference, then exchange them. If $q=R_T/R_{\mathrm{ref}}$, the two ratios obeyThis exact geometric mean cancellation assumes unchanged source outputs and resistances between acquisitions; switching transients and sensor self-heating in a ratiometric resistance measurement can violate that assumption. The primary circuit guide independently treats current-source mismatch and source interchange in its three-wire lead-cancellation circuit; that topology's correction must follow its own equations rather than be replaced by the two-branch model above.^[ref]

A proposed test measures both branch currents through characterized sensing resistors, then changes their assignments while holding the sensor environment fixed. Agreement after swapping tests the mismatch model; agreement from merely changing the common nominal current tests a different cancellation.