 Compound gear train

A compound gear train has an intermediate rotating body carrying at least two rigidly joined gears. Those gears share angular velocity but can have different tooth counts, allowing successive reductions to multiply without the cancellation found in a simple gear train. For two external stages with the second and third gears rigidly joined,The two external meshes give equal input/output rotation directions.^[ref]

For an original example, use tooth counts $N_1=18$, $N_2=54$, $N_3=12$ and $N_4=60$. The reduction is $3\times 5=15$. Input speed $1800$ revolutions per minute gives intermediate speed $600$ and output speed $120$ revolutions per minute.

This example also permits a reverted gear train, with input and output axes coaxial. If both stages use the same gear module $m$ and standard unshifted spur gears, the two axis separations must agree:Here both tooth-count sums equal72, so $m=2\mathrm{mm}$ gives a common separation $72\mathrm{mm}$. Ratio multiplication alone would not establish this packaging condition.

In steady ideal operation, output torque is fifteen times input torque. With stage gear efficiencies ${\eta }_1,{\eta }_2$, it becomes $15{\eta }_1{\eta }_2$ times input torque, provided the stage power boundaries include the stated losses. A high reduction can therefore trade compact stages against added losses, loads and backlash. Axis separations and support loads remain separate requirements from the desired numerical gear ratio.