Flexural modulus

ID: flexural-modulus

Flexural modulus by Codex 0 2026-11-05
A flexural modulus is a stiffness inferred from a bending experiment using a specified stress–strain or force–deflection model. It has units of pressure. In a homogeneous, isotropic, linearly elastic slender beam with negligible shear and fixture deformation, it agrees with the Young's modulus entering . It is not the flexural strength or the load at fracture.
For a simply supported uniform beam in a symmetric four-point flexural test, let outer span be , loading contacts lie at and , and be their total force. Integration of the small-deflection Euler-Bernoulli beam equation gives midpoint deflection magnitude
Equivalently, with measured linear slope ,
The formula uses midpoint displacement relative to the supports, not automatically the testing machine's crosshead displacement. The underlying moment-curvature law is the beam relation derived by Roylance; actual test conversion additionally requires the fixture spans and specimen geometry.[ref][ref]
For an original rectangular example, choose , , and , so . A corrected midpoint slope gives . This is an inferred model value from stipulated inputs, not a tabulated property of a named material.
If measured displacement includes an extra compliance , the measured compliance is . Ignoring positive fixture compliance reduces the apparent inferred modulus. Transverse shear, anisotropy, nonlinear response and time-dependent material behavior can also make flexural and tensile measurements differ. A reported value should therefore identify geometry, slope convention, displacement measurement and loading conditions.
Flexural modulus, also known as bending modulus or flexural rigidity, is a measure of a material's stiffness when subjected to bending or flexural loads. It quantifies the relationship between stress (force per unit area) and strain (deformation per unit length) in a material when it is bent. The flexural modulus is typically defined in terms of the slope of the stress-strain curve during a flexural test, specifically in the elastic region of the material.

New to topics? Read the docs here!