 Idler support reaction

An idler support reaction is the force exerted by the shaft and bearings that balances the mesh loads and other external loads on an idler gear. A vanishing net transmitted torque does not imply a vanishing resultant force: moments can cancel while forces add. A free-body diagram must retain each tooth-contact force and its point of application. The tangential load in each ideal mesh follows from $F_t=|\tau |/r_w$.^[ref]

Consider a steady collinear train with input, idler and output reference radii20,30 and50mm. An input torque $2\mathrm{N}\mathrm{m}$ gives a100N tangential mesh component. On the idler, choose contact positions at $x=-30$ and $x=30\mathrm{mm}$ relative to its center, with both tangential forces upward. Their moments are $-3$ and $+3\mathrm{N}\mathrm{m}$, but their vector sum is200N upward. For equal20degree pressure angles, the two radial mesh components have magnitude $100\tan 20{}^{\circ }\approx 36.4\mathrm{N}$ and opposite directions, so they cancel. Neglecting other loads, the net support reaction is200N downward.

This is the combined support resultant, not automatically the load on each bearing. For a hypothetical shaft supported at axial positions $z=0$ and $z=100\mathrm{mm}$, with the200N upward gear resultant acting at $z=40\mathrm{mm}$, static equilibrium givesThus $R_B=-80\mathrm{N}$ and $R_A=-120\mathrm{N}$. Idler bearing load sharing depends on placement even when the total reaction is fixed.

Noncollinear shaft layouts rotate the mesh-force directions, and helical gears add gear axial force. Acceleration also changes the balance: the sum of torques must supply the idler's angular acceleration, and unequal mesh loads need not cancel radially. The zero-net-torque example therefore establishes a steady ideal force balance, rather than a universal bearing-load formula.