 Internal-standard-normalized matrix factor

An internal-standard-normalized matrix factor divides the mass spectrometry matrix factor of an analyte by that of an internal standard:Here M and0 denote matched matrix and neat-reference responses, with equal corresponding amounts and appropriate blank correction. The number asks whether matrix-dependent response changes cancel in the analyte-to-standard ratio. It does not assert that neither signal is suppressed.

For two invented matrices, let analyte factors be $(0.4,0.8)$ and standard factors also $(0.4,0.8)$. Both normalized factors are1. With standard factors $(0.8,0.4)$ instead, the normalized factors become $(0.5,2.0)$. Normalizing by a poorly matched standard can increase variation rather than remove it. The original method study distinguishes matrix-response magnitude and variability across sources.^[ref]

The cancellation can be expressed algebraically. Suppose ${\mathrm{MF}}_A=k(1+{ϵ}_A)$ and ${\mathrm{MF}}_{IS}=k(1+{ϵ}_{IS})$, with small residual deviations. ThenA common multiplier $k$ cancels exactly, while different residual effects remain. To first order, their variance is $\mathrm{Var}({ϵ}_A)+\mathrm{Var}({ϵ}_{IS})-2\mathrm{Cov}({ϵ}_A,{ϵ}_{IS})$. Correlation therefore matters; two individually variable signals can yield a stable ratio when they vary together.

This post-preparation comparison does not by itself establish matched extraction recovery. If analyte and standard matrix factors are equal but their recoveries are $0.5$ and1, the internal-standard-normalized process efficiency is still $0.5$. State when the standard was added and which response comparison was normalized. An internal standard is useful through demonstrated shared behavior, not through its label alone.