Mass spectrometry matrix factor

A mass spectrometry matrix factor compares analyte response in a sample matrix with response from an equal amount in a specified reference solution. For matched acquisition and blank-corrected peak areas, a common post-preparation comparison isThe post-preparation sample is a prepared blank matrix to which the analyte is added after extraction. This separates response from extraction recovery under the matching assumptions. MF below 1 indicates ion suppression relative to the reference; MF above 1 indicates enhanced response. The number is not an absolute ionization efficiency.

The original method study distinguishes matrix effects, recovery and variation across sample sources.^[ref] For an invented example, take neat response $1000$, post-preparation response $750$ and response $450$ when the same nominal amount is added before preparation. Then MF is $0.75$, the estimated recovery is $450/750=0.60$, and mass spectrometry process efficiency is $450/1000=0.45$. The product $0.75\times 0.60=0.45$ identifies which two effects this model combines.

An internal-standard-normalized matrix factor divides analyte MF by the corresponding MF for an internal standard. If both are $0.50$, the normalized value is 1 even though both raw responses are suppressed. If the analyte MF is $0.80$ and the standard MF is $0.40$, the normalized value is 2. Normalization can therefore fail when the two responses change differently.

Magnitude and variability are separate questions. Three matrices giving factors $(0.50,0.50,0.50)$ have a large common suppression but no between-matrix variation in this invented set. Factors $(0.50,0.70,0.90)$ differ between matrices despite their less suppressed mean. Report the reference, analyte level, sample preparation and response calculation; near-zero reference signals make a ratio unstable, and unmatched volumes or uncorrected offsets can invalidate its interpretation.