 Nicholas A. Lambert

Nicholas A. Lambert coauthored research on rotating accelerometers for gear damage detection with David G. Lewicki and Robert S. Wagoner. Their2015 NASA report identifies Lambert and Wagoner with Ridgetop Group and Lewicki with Glenn Research Center. The contribution documented there is a joint experimental evaluation of embedded rotating sensing against conventional stationary housing measurements.^[ref]

The apparatus used a microelectromechanical system acceleration-sensing package on the rotating pinion. Its radial channel and two tangential channels did not measure identical combinations of motion. With the reported sensor orientation, adding the tangential channels isolated rotational acceleration, while subtracting them isolated the shared lateral contribution. This makes the experiment an example of choosing measurement geometry to separate motions, rather than interpreting every channel as the same gear vibration spectrum.^[ref]

An idealized algebraic version writes the channels as $T_1=u+r\alpha$ and $T_2=-u+r\alpha$, where $u$ is one projected translational acceleration, $r$ is sensor radius and $\alpha$ is angular acceleration. Then $(T_1+T_2)/(2r)=\alpha$ while $(T_1-T_2)/2=u$. Sensor placement, polarity and matching measurement calibration are what permit those cancellations. This illustrative decomposition explains the measurement principle; it does not assign sole authorship of the apparatus to one coauthor.