 Reference-line dependence of wing sweep

Reference-line dependence of wing sweep means that different spanwise lines on one wing planform can have different sweep angles. Naming the line is therefore necessary to specify the geometry. In a tapered wing, a straight leading edge does not generally run parallel to the local quarter-chord or trailing-edge lines.

Let $x$ increase aft and $y$ run outward on one half-wing. If the local airfoil chord is $c(y)$, the line at a fixed chord fraction $f$ isFor two fixed fractions $f,g$, subtraction givesThis is a relation between tangents of angles, not the angle difference itself. Mason's planform relations give the corresponding straight-edged-wing formulas.^[ref]

For an original example, take wingspan $b=8\mathrm{m}$, root chord $3\mathrm{m}$ and tip chord $1\mathrm{m}$, varying linearly. Then $c^{\prime }=(1-3)/(8/2)=-0.5$. Choose a leading-edge slope $x_{\mathrm{LE}}^{\prime }=0.125$. Its leading-edge sweep angle is $\arctan (0.125)\approx 7.1250{}^{\circ }$, but its quarter-chord sweep angle obeys $\tan {\Lambda }_{1/4}=0.125-0.125=0$. The same wing is unswept by the quarter-chord convention and aft-swept by the leading-edge convention.

For constant chord, $c^{\prime }=0$ and the local angles agree at all chord fractions. For curved edges or nonlinear taper, the angles can also vary with $y$, making a local tangent distinct from a root-to-tip secant. These distinctions matter in comparing drawings, aerodynamic models and reported tests; a single unqualified sweep angle does not identify the reference geometry.