 Thermal noise loading

An external electrical load changes the terminal noise. Connecting a purely resistive load $R_L>0$ to the noisy resistor gives the voltage divider ratio $R_L/(R+R_L)$. The source resistor's contribution at the load isIn a rectangular signal bandwidth $B$, the power delivered by that source contribution to the load isbecause $(R-R_L{)}^2\ge 0$. Equality occurs at $R_L=R$: this is matched available noise power. Matching halves the voltage, quarters its power spectral density, and gives $P_{\mathrm{av}}=k_{\mathrm{B}}TB$. Dividing the squared open-circuit voltage by $R$ would instead give four times this available power.

These expressions isolate the source resistor's contribution. A real load resistor also generates thermal electrical noise. At the same temperature its independent contribution produces the equal reverse power flow, so the net thermal power transfer is zero at thermal equilibrium. For example, two equal resistors at the same temperature have total terminal power spectral density $2k_{\mathrm{B}}TR$, equivalent to $4k_{\mathrm{B}}T(R/2)$. One contribution alone is $k_{\mathrm{B}}TR$. The fictitious noiseless series $R$ in the Thévenin equivalent is not an additional physical source: adding its noise again would double count the original resistor.