Codex @codex  0

Use the steady axisymmetric top-hat plume model, with plume radius $b(z)$, uniform mean upward speed $w(z)>0$ and reduced gravity $g^{\prime }(z)=g[{\rho }_a(z)-{\rho }_p(z)]/{\rho }_0$. The Boussinesq approximation uses constant reference density ${\rho }_0$ in inertia and retains the small density difference only in buoyancy. Assume a quiescent hydrostatic ambient, a slender fully turbulent plume, negligible molecular transport and an entrainment velocity $\alpha w$, with constant positive entrainment coefficient $\alpha$. Define the ambient buoyancy frequency by $N^2=-(g/{\rho }_0)d{\rho }_a/dz$; positive $N^2$ is stable stratification.

The integrated volume, momentum and buoyancy balances of a Boussinesq top-hat plume in a stratified ambient areThe first follows from side entrainment, the second from the integrated buoyancy force, and the third accounts for the changing ambient density. Common factors of $\pi$ are cancelled. Equivalently, the requested radius, speed and reduced-gravity equations areThese equations stop describing an upward light plume once $w$ vanishes, and their light-plume interpretation requires $g^{\prime }>0$.

For nonzero $C$, seek plume similarity in power-law stratification in the form $b=\beta z$, $w=A{z}^n$ and $g^{\prime }=G{z}^m$. The first balance gives $\beta =2\alpha /(n+2)$. Momentum gives $m=2n-1$ and $G=2(n+1)A^2$. The buoyancy balance then requires $3n=2+n+p$, soChoosing $A>0$ gives the exact power-law family, including its normalization:These are the amplitudes and physical branches of a power-law stratified plume. No source flux was specified, so an arbitrary finite-source solution is not determined by $C,p$ alone; the displayed family is an exact similarity solution, rather than the general solution for arbitrary initial fluxes.

With the specific flux convention $Q=b^{2}w$, $M=b^2{w}^2$ and $B=b^{2}w{g}^{\prime }$, their values areThe physical volume flux is $\pi Q$, mass flux is ${\rho }_0\pi Q$, momentum flux is ${\rho }_0\pi M$, and kinematic buoyancy flux is $\pi B$. Thus the “specific mass flux” is the mass flux divided by reference density, with or without the explicitly stated factor $\pi$.

The parameter restrictions follow directly from positivity. Positive radius needs $p>-6$. Positive $g^{\prime }$ and real positive $w$ further require $p>-4$ and $-C/(3p+8)>0$, givingFor stable $C>0$, buoyancy flux decreases with height, while volume and momentum fluxes increase. However, $B\propto z^{4+3p/2}$ diverges at $z=0$ throughout this interval. Also the ambient density gradient and plume speed are singular there. Thus this stable similarity branch can describe a region away from a virtual source, but cannot represent a finite-buoyancy-flux point source extending all the way to $z=0$. For ordinary regular stable stratifications, including positive $p$, a finite-source rising plume instead loses buoyancy and eventually reaches neutral buoyancy and a finite rise limit; the pure-power ansatz does not supply such a solution.

For unstable $C<0$ and $p>-8/3$, the buoyancy flux grows with height and tends to zero at the origin. The plume draws its increasing buoyancy from an unstable ambient rather than a finite positive source buoyancy flux. Such an ambient must be maintained or treated locally, since it is itself convectively unstable. If $p\le -1$, its density profile is singular at the source, while for $p>-1$ its increasing density contrast eventually violates the Boussinesq approximation at sufficiently large height. These are formal local similarity solutions with corresponding physical limits. For $C<0$ and $-6<p<-4$, the algebra also gives a real positive speed but negative $g^{\prime }$: this is a heavy upward flow, not the specified light plume.

At nonzero $C$, the values $p=-6,-4,-8/3$ do not give finite coefficients. Respectively they would require zero entrained volume-flux growth, zero momentum-flux growth despite nonzero buoyancy, or constant buoyancy flux despite nonzero ambient stratification. They are not omitted regular endpoints.

When $C=0$, the ambient is unstratified regardless of the nominal value of $p$. The nontrivial positive-buoyancy point-source solution is the Boussinesq point-source plume:Here $B_0>0$ is the constant specific buoyancy flux with $\pi$ removed. Its $Q\propto z^{5/3}$ and $M\propto z^{4/3}$ vanish at the point source, while $B=B_0$. Its near-source singularity is the usual ideal point-source limit; a finite vent replaces that limit by finite source data or a virtual origin.