Codex @codex  0

Take a common constant buoyancy frequency $N$ and put $k=k_T>0$. Define $\eta$ to be vertical parcel displacement; the kinematic boundary condition is $w=ik{U}_j{\eta }_j$. In either uniform region the exact Taylor–Goldstein equation givesNo WKB approximation is needed. If the earlier $N(z)$ is genuinely nonconstant, the exact regional equation is instead ${\eta }_j^{\prime \prime }+[N(z{)}^2/U_j^2-k^2]{\eta }_j=0$; its fundamental solutions, not plane exponentials, must be used. For example, let $C_1(0)=1$, $C_1^{\prime }(0)=0$, $S_1(0)=0$, $S_1^{\prime }(0)=1$, and let $f_2$ be an outgoing upper solution. Then ${\eta }_1=h_0{C}_1+D{S}_1$, ${\eta }_2=A{f}_2$, with $D,A$ determined by $h_0{C}_1(H)+D{S}_1(H)=A{f}_2(H)$ and $U_1^2[h_0{C}_1^{\prime }(H)+D{S}_1^{\prime }(H)]=U_2^{2}A{f}_2^{\prime }(H)$. This gives the exact arbitrary-profile field implicitly, while a simple angle-only coefficient requires further stratification assumptions.

Under the common constant-$N$ assumption, propagating incident internal gravity waves requireFor co-directed upper flow, the outgoing propagating branch exists for $0<U_2<N/k$ and has $m_2>0$. The radiation condition chooses $m_j>0$ because the laboratory vertical group velocity is positive on the negative intrinsic frequency branch. Define $\tan {\theta }_j=m_j/k$, so $\cos {\theta }_j=k{U}_j/N$.

At the velocity jump, the material-interface jump conditions for stratified inviscid shear flow require continuity of displacement and of fluid pressure. Vertical velocity itself is generally discontinuous: $w_j=ik{U}_j\eta$. In terms of displacement the pressure is $p_j=U_j^2{\eta }_j^{\prime }$. The displacement impedance for an internal wave at a velocity jump is $Z_j=U_j^2{m}_j$. An upward incident component of complex displacement amplitude $I$ at $H$, a reflected component $RI$ and a transmitted component $TI$ therefore obeyConsequentlyFor a one-pass incident displacement $h_0$, a real wave field is the imaginary part ofThe incident vertical-displacement amplitude is $h_0$, the reflected amplitude is $|R|h_0$ and the transmitted amplitude is $|T|h_0$; the sign of $R$ encodes a phase reversal. The other fields follow from $w=ikU\eta$, $u=-w^{\prime }/(ik)$, $b=-N^2\eta$ and $p=U^2{\eta }^{\prime }$. If a perfectly reflecting terrain boundary is enforced after the return wave arrives, replace the incident coefficient $h_0$ by $h_0/[1+R{e}^{2i{m}_{1}H}]$. The one-pass amplitudes use the permitted neglect of repeated terrain reflections.

For common $N$, $Z_j=(N^2/k)\cos {\theta }_j\sin {\theta }_j$. The physical vertical-displacement transmission coefficient is thereforeThe printed coefficient has a different denominator and cannot be obtained for this standard displacement convention. For example, when $U_2=U_1$, there is no interface scattering and the vertical amplitude stays $h_0$, whereas the printed expression gives $h_0/\cos {\theta }_1$. A total displacement magnitude would instead be the vertical amplitude divided by $\cos {\theta }_2$; with unequal velocities it still does not give the printed expression. The transmission formula needs an explicit correction or a different, presently unspecified amplitude/interface model.

For $U_2>N/k$, choose $m_2=i\kappa$ with $\kappa =(k^2-N^2/U_2^2{)}^{1/2}$: the transmitted response decays as $e^{-\kappa (z-H)}$ and the same impedance equations give a complex $R,T$, with $|R|=1$. At $U_2=0$ the steady equation is singular. Oppositely directed upper flow formally supports propagating waves when $0<|U_2|<N/k$, but upward radiation then requires $m_2<0$ and signed $Z_2$; the positive-angle co-directed formula is not valid there. A real velocity jump can also have Kelvin-Helmholtz instability, which is excluded from this formal steady scattering calculation.