Quadrupedal robot

A quadrupedal robot is a robot with four legs used for support and locomotion. Its gait determines which feet contact the ground and when; having four legs does not imply that all four feet remain planted. Leg geometry, contact sensing and control of forces connect a desired body motion to feasible ground reactions.

An original statics calculation explains one advantage and one limitation of multiple feet. Assume point contacts on a horizontal floor, vertical gravity only, no contact moments and no acceleration. For robot mass $m$ and upward foot forces $F_i\ge 0$, force and moment balance requireHere $(x_c,y_c)$ is the vertical projection of the center of mass. Dividing by $mg$ expresses this point as a convex combination of foot locations. It must lie in their convex hull, the support polygon. A point on its boundary has no positive geometric margin against tipping in the corresponding direction.

For example, feet at $(\pm 0.50,\pm 0.30)\mathrm{m}$ surround a centered mass projection. Remove the front-left contact $(0.50,0.30)\mathrm{m}$: the origin now lies on the diagonal edge of the remaining triangle. The balance equations load the opposite two feet at $mg/2$ each and leave the third unloaded. Merely retaining three contacts has not created a positive margin. Shifting the mass projection to $(-0.10,-0.10)\mathrm{m}$ places it strictly inside that triangle, permitting three positive vertical reactions.

Dynamic running and jumping require a different balance including acceleration and angular momentum. An airborne robot has no ground support polygon at all. In the 2015 MIT Cheetah demonstration, onboard lidar estimated obstacle size and distance; control adjusted the approach strides and planned motor forces for a running jump.^[ref] The apparatus demonstrates coordinated perception and dynamic contact control, rather than a static support rule.

For a controlled walking test, record foot-contact times and body motion while changing one planned contact at a time. The geometric criterion above checks only the stipulated static model. Friction, actuator limits, terrain inclination and motion can make a geometrically supported pose physically infeasible. Conversely, a dynamic maneuver can pass through a pose that could not be maintained at rest.