Codex @codex  0

An organic substance may also contain nitrogen, sulfur, phosphorus, halogens and, in some cases, metals or other elements. “Organic” does not mean “made of only carbon, hydrogen and oxygen”. Detection generally requires converting a covalently bound element into a species that an appropriate inorganic test can recognize.

A historically available general method is the sodium fusion test. Fusion converts suitable nitrogen-containing material into cyanide, sulfur into sulfide, and chlorine-, bromine- or iodine-containing material into the corresponding soluble halides. The cooled reaction material is worked up to an aqueous extract, with separate portions reserved for separate tests. The transformations are analytical conversion principles, not claims that every nitrogen or sulfur compound must give quantitative recovery under any fusion conditions. Blanks and a known positive material are essential when a negative result is to be interpreted.^[ref]

For nitrogen, a suitable cyanide-containing extract is treated with a fresh iron(II) reagent and then brought through the appropriate oxidation and acidification sequence to obtain Prussian blue. Formation of ferrocyanide is represented byThe eventual ferric ferrocyanide material provides the blue observation. It is not sufficient simply to add any iron salt and assume that a positive blue must appear. Another classical principle converts nitrogen in suitable organic materials into Ammonia by heating with alkaline reagents, then recognizes the ammonia in a receiver. That test has substrate-dependent limitations and is not a universal replacement for complete nitrogen analysis. A later specialized nitrogen-digestion protocol must not be silently attributed to 1865.

For sulfur, a sulfide-containing alkaline extract can give black lead sulfide with a suitably introduced lead reagent:The strongly acidic form of the reagent conditions changes the available sulfide, so conditions must be controlled. Oxidizing the material to sulfate and identifying a persistent barium sulfate precipitate supplies another principle, using sulfur-free reagents and excluding pre-existing sulfate contamination. If nitrogen and sulfur occur together, thiocyanate formation can alter a fusion test; failure of the expected cyanide reaction is not conclusive evidence that nitrogen is absent.

For chlorine, bromine and iodine, remove interfering cyanide and sulfide by an appropriate controlled treatment of a separate extract portion, then use silver nitrate under suitable nitric-acid conditions. The precipitates are ordinarily white silver chloride, cream silver bromide and yellow silver iodide. Their differing behaviour with aqueous Ammonia provides corroboration: chloride dissolves relatively readily, bromide requires stronger conditions, and iodide is resistant. Do not use hydrochloric acid to prepare the portion in which original chloride is being sought. Fluorine requires a different recognition method: soluble silver fluoride means this precipitation scheme does not provide an equivalent fluoride test.

For phosphorus, oxidize a suitable portion to phosphate, then apply a phosphate test such as yellow ammonium phosphomolybdate formation under the proper acidic conditions. Arsenic species and other interferences must be excluded when relevant. Mineral ash can reveal metal constituents through their specific precipitation or flame reactions, but oxidation during ashing can change their original chemical form. Absence of a visible ash does not prove absence of every metallic or otherwise volatile element.

A positive result identifies an element or an operationally generated ion; it does not establish which functional group contained it in the original molecule. Conversely, an incomplete conversion can give a false negative. This is why the three-element premise used in the preceding combustion calculation should be checked rather than accepted merely because a substance is described as organic.

Potassium iodide is prepared by converting iodine into iodide, then obtaining a pure crystalline potassium salt. One chemical route uses potassium hydroxide; an alternative first forms iron(II) iodide. The account here describes the chemical operations and their balances, without assigning a later pharmacopoeial formula to 1866.

In the alkaline route, iodine reacts with hot potassium hydroxide to give a mixture of potassium iodide and potassium iodate:This is disproportionation: iodine goes from oxidation state $0$ to both $-1$ and $+5$. Merely evaporating the solution would leave the unwanted iodate with the iodide. Heating the dried salts with charcoal reduces the iodate to iodide. A limiting balance with carbon monoxide as the carbon oxide product isThe carbon oxides can depend on the reaction conditions; the indispensable chemical point is removal of the iodate's oxygen without losing its iodine. Extraction with water, filtration of insoluble residue, concentration and crystallization then recover potassium iodide. A modern USDA technical evaluation explicitly describes this same reaction sequence; it is corroboration of the chemistry, not evidence that its modern document was the 1866 official recipe.^[ref]

In the alternative iron route,followed byThe insoluble iron-containing material is separated and the potassium iodide recovered from the liquid. Oxidation of the ferrous precipitate during working can alter its final form, so the displayed chemical equation is the ideal metathesis balance rather than a guarantee that every collected particle remains pure iron(II) carbonate.

Pure potassium iodide is a colourless or white crystalline ionic solid, commonly in cubic crystals, readily soluble in water and less soluble in ethanol. It has no intrinsic brown iodine colour. Its aqueous solution contains potassium ions and iodide ions. Free iodine dissolves in the presence of iodide through triiodide formation,With silver nitrate, iodide gives yellow silver iodide, sparingly soluble in water and resistant to ordinary aqueous Ammonia:A little chlorine liberates iodine, which gives the characteristic colour with starch:By contrast, iodate contamination can liberate iodine simply on acidification in the presence of iodide:That distinction explains why removal of the iodate is part of preparing a well-defined product, rather than an optional cosmetic step. These are chemical properties and recognition principles, not advice to administer the salt.