 Axial stiffness

Axial stiffness measures resistance to extension or shortening along a specified loading axis. For a proportional response, $F=K_{\mathrm{ax}}\Delta L$; for a nonlinear response, specify whether the reported value is a secant stiffness or tangent stiffness. A straight uniform bar in small-strain linear elasticity haswhere $E$ is Young's modulus, $A$ is the load-bearing cross-sectional area and $L$ the deforming length.^[ref] Axial rigidity $EA$ has units of force; axial stiffness $EA/L$ has units of force per length.

An original stepped-bar example shows why a single area is sometimes insufficient. Join two ideal straight segments end to end, with no distributed axial loading. Both carry the same force $F$, so their extensions add:Choose $E_1=E_2=70\mathrm{GPa}$, $L_1=20\mathrm{mm}$, $L_2=30\mathrm{mm}$, $A_1=1\mathrm{m}{\mathrm{m}}^2$ and $A_2=2\mathrm{m}{\mathrm{m}}^2$. The total mechanical compliance is $0.0005\mathrm{mm}{\mathrm{N}}^{-1}$, giving $K_{\mathrm{ax}}=2000\mathrm{N}\mathrm{m}{\mathrm{m}}^{-1}$. A $100\mathrm{N}$ force extends the bar by $0.050\mathrm{mm}$, divided into $0.0286$ and $0.0214\mathrm{mm}$ in the two segments. The thinner segment extends more despite being shorter.

In parallel, components sharing the same extension instead add their axial stiffnesses, as in a straight unbonded material-fibre bundle with every strand engaged. These are different constraints, described by series and parallel spring stiffness.

A physical test should measure extension between defined specimen points. Crosshead displacement can include machine compliance and grip motion, so the slope of the complete apparatus is not automatically the specimen's axial stiffness. Structural geometry and loading constraints must be separated from the material's Young's modulus.