 Effective beam shear rigidity

Effective beam shear rigidity is the coefficient $S$ relating a transverse shear-force resultant $V$ to the beam shear angle $\gamma$ in a reduced linear beam model:Here $G$ is shear modulus, $A$ is material area and $k_s$ is a beam shear correction coefficient. The coefficient $S$ has units of force, whereas beam flexural rigidity has units $\mathrm{N}{\mathrm{m}}^2$. A shear-deformable beam permits section rotation to differ from centreline slope; Bower gives the corresponding force relation and explains the correction coefficient's dependence on section geometry and the approximation used.^[ref]

An original energy calculation explains one familiar correction. For a homogeneous rectangle of width $b$, thickness $h$ and area $A=bh$, adopt the classical parabolic shear-stress approximationIt has resultant ${\int }_A\tau dA=V$. Its shear elastic energy per unit beam length isEquating this to the reduced-model energy $V^2/(2S)$ gives $S=5GA/6$. Thus $k_s=5/6$ follows from this particular energy-matching approximation; it is not a universal material constant or an exact coefficient for every beam theory.

The effect on a three-point bending test can be derived from that reduced energy. For a simply supported beam under central force $P$, the magnitude of shear force is $P/2$ on each half. Hence $U_s=P^{2}L/(8S)$ and its contribution to central displacement is $\partial U_s/\partial P=PL/(4S)$. Combining it with the bending response givesThe shear contribution becomes relatively more important as the span decreases.

For stipulated $B=2\mathrm{N}{\mathrm{m}}^2$, $S=20000\mathrm{N}$, $L=0.10\mathrm{m}$ and $P=10\mathrm{N}$, the two contributions are $0.1042$ and $0.0125\mathrm{mm}$. Shear adds twelve percent of the bending deflection. A span series with a load cell and direct midspan displacement readout can distinguish cubic bending dependence from linear shear dependence, provided contact and fixture contributions are also controlled. Inferring $G$ from the response additionally requires the section geometry and correction model.